Wisconsin and area Classifieds
#3027
Junior Member
Join Date: Sep 2006
Location: Madison, WI, U.S.A
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Re:
have a set of 17" tenzo r mean-6's in rare bronze color 4 sale and 16" mille miglias. tenzo-r's for 550/obo or willing to trade and mille are best offer. email me for pics tracka1986@yahoo.com
#3029
Re: Re: (94_civicEx)
92-95 black civic si hood. - $50
93 civic si z6 long block - $250
92-95 civic stuff. axles, p/s, a/c, shift linkage,etc. - make offer
92-95 civic coupe/hatch projectors - $50
92-95 civic black dash - $10
99-00 civic si p2t ecu - $60
92-95 eg si steering wheel.
<U>Will accept trades also. </U>
Modified by eg-t at 6:20 PM 11/22/2006
93 civic si z6 long block - $250
92-95 civic stuff. axles, p/s, a/c, shift linkage,etc. - make offer
92-95 civic coupe/hatch projectors - $50
92-95 civic black dash - $10
99-00 civic si p2t ecu - $60
92-95 eg si steering wheel.
<U>Will accept trades also. </U>
Modified by eg-t at 6:20 PM 11/22/2006
#3031
Honda-Tech Member
Join Date: Apr 2004
Location: Milwaukee, WI
Posts: 931
Likes: 0
Received 0 Likes
on
0 Posts
Re: (civic4lif)
MOVING SALE
1993 Civic SI/EX SOHC Vtec head complete NO DIZZY $150
1995 Civic SI/EX SOHC Vtec bottom end(complete/still assembled) $150
1993 Civic SI/EX tranny $250
1991 CRX SI/CIVIC SI Bottom block complete $100
1991 CRX/CIVIC SI head complete NO DIZZY $100
1991 CRX/CIVIC SI tranny $150
MISC 90 CRX/CIVIC DX/LX tranny $50 each
MISC 92-00 CIVIC DX/CX/VX trannies $100 each
JDM B16 tranny no grinds $600
GSR stock pistons SET $50
LS stock pistons SET $50
SOHC VTEC stock bore SRP/JE pistons only 3 (good cond.) $50
GSR stock rods SET $50.....have many sets
LS stock rods SET $50 .....have many sets
GSR bottom block GIRDLES 2 sets $75 each
PR3 ecu $200
PWO ecu $200
SK2 LS obd 0 ECU $200
P2P 99-00 CIvic SI ecu $50.00
91 LS head near complete $100 OBO
95 LS head near complete $100
GT35R HO turbocharger(10 passes near new) $750
B18c1/B18c/B18c5 BRAND NEW eagle rods in box: $330.00 come and get them locally.............
PM or email me for TONS AND TONS of stuff for cheap... I have like a shop full of going-in-the-trash Honda/Acura parts..... http://www.beeyondeng.com go there and email me for additional parts for CHEAP..........
1993 Civic SI/EX SOHC Vtec head complete NO DIZZY $150
1995 Civic SI/EX SOHC Vtec bottom end(complete/still assembled) $150
1993 Civic SI/EX tranny $250
1991 CRX SI/CIVIC SI Bottom block complete $100
1991 CRX/CIVIC SI head complete NO DIZZY $100
1991 CRX/CIVIC SI tranny $150
MISC 90 CRX/CIVIC DX/LX tranny $50 each
MISC 92-00 CIVIC DX/CX/VX trannies $100 each
JDM B16 tranny no grinds $600
GSR stock pistons SET $50
LS stock pistons SET $50
SOHC VTEC stock bore SRP/JE pistons only 3 (good cond.) $50
GSR stock rods SET $50.....have many sets
LS stock rods SET $50 .....have many sets
GSR bottom block GIRDLES 2 sets $75 each
PR3 ecu $200
PWO ecu $200
SK2 LS obd 0 ECU $200
P2P 99-00 CIvic SI ecu $50.00
91 LS head near complete $100 OBO
95 LS head near complete $100
GT35R HO turbocharger(10 passes near new) $750
B18c1/B18c/B18c5 BRAND NEW eagle rods in box: $330.00 come and get them locally.............
PM or email me for TONS AND TONS of stuff for cheap... I have like a shop full of going-in-the-trash Honda/Acura parts..... http://www.beeyondeng.com go there and email me for additional parts for CHEAP..........
#3032
Re: Re: (eg-t)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eg-t »</TD></TR><TR><TD CLASS="quote">92-95 black civic si hood. - $50
93 civic si z6 long block - $250
92-95 civic stuff. axles, p/s, a/c, shift linkage,etc. - make offer
92-95 civic coupe/hatch projectors - $50
92-95 civic black dash - $10
99-00 civic si p2t ecu - $60
92-95 eg si steering wheel.
Modified by eg-t at 9:27 AM 11/21/2006</TD></TR></TABLE>
Thats a good deal for a z6
93 civic si z6 long block - $250
92-95 civic stuff. axles, p/s, a/c, shift linkage,etc. - make offer
92-95 civic coupe/hatch projectors - $50
92-95 civic black dash - $10
99-00 civic si p2t ecu - $60
92-95 eg si steering wheel.
Modified by eg-t at 9:27 AM 11/21/2006</TD></TR></TABLE>
Thats a good deal for a z6
#3036
#3038
Honda-Tech Member
Join Date: Sep 2002
Location: stevens point, WI, 54481
Posts: 2,940
Likes: 0
Received 0 Likes
on
0 Posts
Re: (jdmef-9)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmef-9 »</TD></TR><TR><TD CLASS="quote">wtb asap!!!!!!!!!
EF radiator (dont give a **** wat it is as long as it works!)</TD></TR></TABLE>
I have a few crx radiators if thats what a ef is.
EF radiator (dont give a **** wat it is as long as it works!)</TD></TR></TABLE>
I have a few crx radiators if thats what a ef is.
#3039
Junior Member
Join Date: Nov 2005
Location: Lost in, MN, united states
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
#3043
Re: Re: (civicandy)
HKS 'Style' Mushroom Turbo Filter (Green). Brand new, still in the box. $20
Inwells 2 way LCD Alarm System. Brand new, still in the box. Letting it go for $100!!!!
3 15" RS Limited Concept rims with crappy tires. $150 firm!!
B20a (88-91 prelude) intake manifold. - $20.
Integra SE Wheels. 2 (205-50-15) Falken Azenis and 2 (195/50/15) Michelin tires. $250.
Greddy Shiftknob. Scratches etc from daily driven. $5.
Also wanting to trade my 5zigen div3's with toyo trampio tires for a set of 5zigen fno1rc or a set of Buddy Club P1 SF.
Inwells 2 way LCD Alarm System. Brand new, still in the box. Letting it go for $100!!!!
3 15" RS Limited Concept rims with crappy tires. $150 firm!!
B20a (88-91 prelude) intake manifold. - $20.
Integra SE Wheels. 2 (205-50-15) Falken Azenis and 2 (195/50/15) Michelin tires. $250.
Greddy Shiftknob. Scratches etc from daily driven. $5.
Also wanting to trade my 5zigen div3's with toyo trampio tires for a set of 5zigen fno1rc or a set of Buddy Club P1 SF.
#3046
Junior Member
Join Date: Dec 2004
Location: in the cold, WI, usa
Posts: 734
Likes: 0
Received 0 Likes
on
0 Posts
buy my 92 civic LX price dropped this needs to sell
http://hondamarketplace.com/zerothread?id=1799474
http://hondamarketplace.com/zerothread?id=1799474
#3047
Honda-Tech Member
Join Date: Jul 2004
Location: USA
Posts: 3,222
Likes: 0
Received 0 Likes
on
0 Posts
Re: (fast_96gsr)
revised...
Hasport Mounts for 88-91 Civic/Crx with Hydro tranny. Complete kit, come with bolts (not pictured) 80A bushings-$399
Rear T bracket for 88-91 Civic/Crx for use with Hydro b-series tranny-$30
Rota Jmag rims... bought 1 month ago, have original boxes etc for them. Paid $550 without tires, taking best offer. Not 1 scratch on them!
JDM ef8 crx front fog lights. 1 of them is still intact with just a hairline crack in it which you can't notice. Other one is cracked and worthless. Give me an offer on the 1 if you want it.
88-91 Civic/Crx shift linkage for b-series swap(comes with stock shifter)-$70
BUILT '92 Jdm B16 head. Rebuilt less then 1500miles ago by Mike at extreme parts. Has Supertech valve springs/titanium retainers, ferrea stainless valves, new Oem Honda valve seals, type r LMA's. Intake ports were ported/polished by DH-racing. Before head was built it was hot-tanked/resurfaced by C&S machining. Comes with valve cover/all the cam caps/bolts etc. Vtec solenoid. I will include stock b16 intake manifold/injectors/fuel rail. All you will need are some cams. -$900
'97 Type R tranny-Completely Rebuilt by Mike at Extreme parts. Tranny has All new Carbon coated synchros by Gearspeed. 3rd+4th gear sleeve set was replaced with an OEM Honda one. New Honda countershaft and mainshaft top/bottom bearings as well as new seals. Tranny has less then 1500miles on it. Stock Type r LSD with 4.40 Final drive. -$1400 well worth it. Add up the synchros+other parts + labor and your basically getting the tranny for free.
CNC Reverse throw clutch pedal with master cylinder- For all you guys that want to convert your car to true hydrolic this is what you need. All you do is just run your -3an line straight to your clutch slave cylinder-$70
Schedule 40 stainless steel(glass beaded) butt-welded RAM style turbo manifold for b-series. Beautiful manifold, before pic of it glass beaded.. after pic looks nasty since it got all greased up with oil while removing it. Motor made 550whp with this manifold. Has 44mm Tial vband flange on it and it's turbine flange is a t3. It's not ac compatible but you can use power steering (just have to trim the top bracket a little bit) $450
Edelbrock Victor X Intake manifold for b16/type r heads. Installed it and car sat ever since. Basically brand new, have box as well.-$270
Modified Avid racing traction bar for 88-91 Civic/Crx's. This is what all you turbo guys need if your 3" or even 4" downpipe hits the traction bar. Has mad clearance.$200 + your stock one.
Keizer 2 piece forged aluminum wheels 13". Mounted on them are 24.5" x 8" Mickey's but they are completely worn. Weigh 7.5 lb's each. -$300
RARE '91 LSD Y1 cable JDM tranny. NO grinds. picture of tranny before i installed it on my ef8. '92 JDM b16a engine is also for sale. Bone stock has 65K on it!! Runs great, doesn't burn any oil etc. Come check it out before you buy! I'm looking to sell the complete swap OR i'm willing to part out and sell everything seperately such as the tranny, complete b16 head or block. Throw me some offers or pm me if interested.
Rear SPC toe link adjusting kit for 89-91 crx,92-97 del sol,88-00 Civic, and 90-01 integra's. Like new, can't even tell it was used. Perfect working condition-$80
88 RHD crx rolling shell. All you need is a motor/tranny. $2500 firm clean registered title. pm me for further details.
Intake system removed from 91 Ef8 Sir crx-$100!
Front upper strut bar, rear lower tie bar. Universal fit, 88-00 civic 90-01 integra's- $10 each picked up.
Drivers side axle from 91 JDM b16a motor. Driver's side, great condition boot intact. Comes with new Honda axle nut-$40
Cable b-series halfshaft removed from 91 JDM b16 engine-$40
Suspension techniques rear sway bar for 88-91 Civic/Crx's. Like new condition! No rust, not even a noticeable scratch! Comes with EVERYTHING to install it including tow hook brackets, polyurethane bushings, adjustable endlinks + L brackets. Paid $200 Asking $120 picked up only.
TI-83plus graphing calcutor, perfect working condition-$25!
88-91 Crx rear bumper, no cracks etc. Has metal plate since the exhaust came off on the right, but you can cover it with a rear lip or something -$25
Anyone interested in any parts PM me
Modified by theinfamouskonrad at 1:37 PM 11/29/2006
Hasport Mounts for 88-91 Civic/Crx with Hydro tranny. Complete kit, come with bolts (not pictured) 80A bushings-$399
Rear T bracket for 88-91 Civic/Crx for use with Hydro b-series tranny-$30
Rota Jmag rims... bought 1 month ago, have original boxes etc for them. Paid $550 without tires, taking best offer. Not 1 scratch on them!
JDM ef8 crx front fog lights. 1 of them is still intact with just a hairline crack in it which you can't notice. Other one is cracked and worthless. Give me an offer on the 1 if you want it.
88-91 Civic/Crx shift linkage for b-series swap(comes with stock shifter)-$70
BUILT '92 Jdm B16 head. Rebuilt less then 1500miles ago by Mike at extreme parts. Has Supertech valve springs/titanium retainers, ferrea stainless valves, new Oem Honda valve seals, type r LMA's. Intake ports were ported/polished by DH-racing. Before head was built it was hot-tanked/resurfaced by C&S machining. Comes with valve cover/all the cam caps/bolts etc. Vtec solenoid. I will include stock b16 intake manifold/injectors/fuel rail. All you will need are some cams. -$900
'97 Type R tranny-Completely Rebuilt by Mike at Extreme parts. Tranny has All new Carbon coated synchros by Gearspeed. 3rd+4th gear sleeve set was replaced with an OEM Honda one. New Honda countershaft and mainshaft top/bottom bearings as well as new seals. Tranny has less then 1500miles on it. Stock Type r LSD with 4.40 Final drive. -$1400 well worth it. Add up the synchros+other parts + labor and your basically getting the tranny for free.
CNC Reverse throw clutch pedal with master cylinder- For all you guys that want to convert your car to true hydrolic this is what you need. All you do is just run your -3an line straight to your clutch slave cylinder-$70
Schedule 40 stainless steel(glass beaded) butt-welded RAM style turbo manifold for b-series. Beautiful manifold, before pic of it glass beaded.. after pic looks nasty since it got all greased up with oil while removing it. Motor made 550whp with this manifold. Has 44mm Tial vband flange on it and it's turbine flange is a t3. It's not ac compatible but you can use power steering (just have to trim the top bracket a little bit) $450
Edelbrock Victor X Intake manifold for b16/type r heads. Installed it and car sat ever since. Basically brand new, have box as well.-$270
Modified Avid racing traction bar for 88-91 Civic/Crx's. This is what all you turbo guys need if your 3" or even 4" downpipe hits the traction bar. Has mad clearance.$200 + your stock one.
Keizer 2 piece forged aluminum wheels 13". Mounted on them are 24.5" x 8" Mickey's but they are completely worn. Weigh 7.5 lb's each. -$300
RARE '91 LSD Y1 cable JDM tranny. NO grinds. picture of tranny before i installed it on my ef8. '92 JDM b16a engine is also for sale. Bone stock has 65K on it!! Runs great, doesn't burn any oil etc. Come check it out before you buy! I'm looking to sell the complete swap OR i'm willing to part out and sell everything seperately such as the tranny, complete b16 head or block. Throw me some offers or pm me if interested.
Rear SPC toe link adjusting kit for 89-91 crx,92-97 del sol,88-00 Civic, and 90-01 integra's. Like new, can't even tell it was used. Perfect working condition-$80
88 RHD crx rolling shell. All you need is a motor/tranny. $2500 firm clean registered title. pm me for further details.
Intake system removed from 91 Ef8 Sir crx-$100!
Front upper strut bar, rear lower tie bar. Universal fit, 88-00 civic 90-01 integra's- $10 each picked up.
Drivers side axle from 91 JDM b16a motor. Driver's side, great condition boot intact. Comes with new Honda axle nut-$40
Cable b-series halfshaft removed from 91 JDM b16 engine-$40
Suspension techniques rear sway bar for 88-91 Civic/Crx's. Like new condition! No rust, not even a noticeable scratch! Comes with EVERYTHING to install it including tow hook brackets, polyurethane bushings, adjustable endlinks + L brackets. Paid $200 Asking $120 picked up only.
TI-83plus graphing calcutor, perfect working condition-$25!
88-91 Crx rear bumper, no cracks etc. Has metal plate since the exhaust came off on the right, but you can cover it with a rear lip or something -$25
Anyone interested in any parts PM me
Modified by theinfamouskonrad at 1:37 PM 11/29/2006
#3048
Honda-Tech Member
Join Date: Mar 2005
Location: Chicago, Illinois, usa
Posts: 1,466
Likes: 0
Received 0 Likes
on
0 Posts
Re: (theinfamouskonrad)
FS:
#1. DPFI to MPFI conversion parts from 90 Civic Si (intake manifold with injectors,PM6 ecu, distributor with new cap, rotor) MAKE OFFERS!!!!!
#2. Auto-to-manual conversion parts for 92-95 civic (clutch master cylinder,peddle assembly, shift linkage with shifter, slave cylinder with lines, manual console, also auto-2-manual innovative poly mount brand new in box) MAKE OFFERS!!!!!
#3. Automatic guage cluster from my last civic hatch DX 64,000 miles no tach excellent condition. MAKE OFFER!!!!!!!!!!
Just want to get rid of this stuff from my basement, since i no longer have the car and now have a 5-speed hatch. ALL REASONABLE OFFERS WILL NOT BE TURNED DOWN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!
LOCATED IN CHICAGO,IL.
#1. DPFI to MPFI conversion parts from 90 Civic Si (intake manifold with injectors,PM6 ecu, distributor with new cap, rotor) MAKE OFFERS!!!!!
#2. Auto-to-manual conversion parts for 92-95 civic (clutch master cylinder,peddle assembly, shift linkage with shifter, slave cylinder with lines, manual console, also auto-2-manual innovative poly mount brand new in box) MAKE OFFERS!!!!!
#3. Automatic guage cluster from my last civic hatch DX 64,000 miles no tach excellent condition. MAKE OFFER!!!!!!!!!!
Just want to get rid of this stuff from my basement, since i no longer have the car and now have a 5-speed hatch. ALL REASONABLE OFFERS WILL NOT BE TURNED DOWN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!
LOCATED IN CHICAGO,IL.
#3049
Honda-Tech Member
Join Date: Feb 2005
Location: Lake Winnebago, WI, USA
Posts: 800
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re: (civic4lif)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civic4lif »</TD></TR><TR><TD CLASS="quote">WTB
GSR or B16 head ASAP </TD></TR></TABLE>
PM'd
GSR or B16 head ASAP </TD></TR></TABLE>
PM'd
#3050
Re: Re: (97_hatch)
Someone come get this legit z6 long block. $250 is a bet for a running z6. Been sitting ever since end of april. Compare to $350+ you wont find a better deal than this. Ran 89+ octane and mobil 1 5w-30 only. Missing dizzy, injectors, IAT other than that its complete.
still got the eg si black hood. $40
92-95 eg hatch halo projector $50
92-95 civic black dash $10
eg si steering wheel make offer
misc z6 stuff
p/s - $20
a/c - $10
linkage - $20
axles "still good"- $30
Throttle cable - $10
other stuff I might forgot
96-00 dx EM - $20
99-00 si p2t ecu - $50
Located in milwaukee.
Modified by eg-t at 1:19 PM 11/30/2006
still got the eg si black hood. $40
92-95 eg hatch halo projector $50
92-95 civic black dash $10
eg si steering wheel make offer
misc z6 stuff
p/s - $20
a/c - $10
linkage - $20
axles "still good"- $30
Throttle cable - $10
other stuff I might forgot
96-00 dx EM - $20
99-00 si p2t ecu - $50
Located in milwaukee.
Modified by eg-t at 1:19 PM 11/30/2006