TW: Built ITR swap
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: fo sho, IIIIL
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
TW: Built ITR head, JUN
edited: only sellin the head
head:
REAL JUN! stage 3 cams, valve springs, retainers, and cam gears.
supertech flat face valves.
the head is a stock cast ITR head. it was bought brand new from honda just for this motor.
type R intake many w/ ITR throttle body that is ported to a 66mm
RC 310 injectors
AEM fuel rail and FPR
and JUN ecu.
this head was in my ef hatch w/ a 2 1/4 exahust on a jdm type r bottom end made 200HP and 139TQ at the wheels. have dyno sheet if needed proof. i recently bought an integra and im starting school soon. i jus did a freshin up rebiuld because i was planning on putting the motor in my teg, but i wanted to jus see what i could get for the head, because i am thinking of going a different route motor wise. il try and post some pics soon.
4300 O.B.O.
email me offers Brider17@aol.com
Modified by BigChina at 11:37 AM 10/14/2007
Modified by BigChina at 11:39 AM 10/14/2007
head:
REAL JUN! stage 3 cams, valve springs, retainers, and cam gears.
supertech flat face valves.
the head is a stock cast ITR head. it was bought brand new from honda just for this motor.
type R intake many w/ ITR throttle body that is ported to a 66mm
RC 310 injectors
AEM fuel rail and FPR
and JUN ecu.
this head was in my ef hatch w/ a 2 1/4 exahust on a jdm type r bottom end made 200HP and 139TQ at the wheels. have dyno sheet if needed proof. i recently bought an integra and im starting school soon. i jus did a freshin up rebiuld because i was planning on putting the motor in my teg, but i wanted to jus see what i could get for the head, because i am thinking of going a different route motor wise. il try and post some pics soon.
4300 O.B.O.
email me offers Brider17@aol.com
Modified by BigChina at 11:37 AM 10/14/2007
Modified by BigChina at 11:39 AM 10/14/2007
Thread
Thread Starter
Forum
Replies
Last Post
mynameizstitch
All Motor / Naturally Aspirated
8
04-08-2013 07:43 PM