right hand drive fs/ft
03-24-2011, 10:02 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2007
Location: B-troit, wi, usa
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
right hand drive fs/ft
SHELL HAS BEEN TRADED!
SHELL HAS BEEN TRADED!
SHELL HAS BEEN TRADED!
SHELL HAS BEEN TRADED!
SHELL HAS BEEN TRADED!
SHELL HAS BEEN TRADED!
SHELL HAS BEEN TRADED!
SHELL HAS BEEN TRADED!
well i kinda wanna sell her now......
1994 civic coupe dx.
clean body NO RUST, few dents n such.
-D16Z6
-block hot tanked, honed, resurfaced, notched and painted.
-head hot tanked, resurfaced, 3avj, new stem seals.
-AEM fuel rail
-AEM fpr
-880cc precision injectors
-dsm resistor box
-eagle H-beam rods
-Vitara 75mm pistons
-acl rod and main bearings
-king thrust washers
-16g turbo
-log style turbo mani
-ARP head studs (put in last week)
-cometic head gasket (also last week)
-a/t to m/t solid mount
-new solid motor mounts
-walbro 255 fuel pump
-E85
-short throw
-em1 seats
-chipped p28 on chrome
-coilovers
-greddy axle back
-cf hood
new engine harness in.
car misses and dont wanna idle. the timing is off a few teeth but i have no time to work on this anymore!
the bad-
-no driver side window (have it tho)
-cf hood cracked up from hitting windshield on old car (zip tie band aids)
-no heat due to a tube sock being stuck in the blower motor (don't ask how it got there)
-needs new tail lights
-could use a new starter maybe battery
-comes with the crx si wheels and a set of steelies. not so good tires........
the good-
-rust free
-has potential
-very fun to drive
-fresh head gasket and head studs last week (maybe 3 miles on them)
i am looking to trade it for reliable turbo d's. shell swap for ek hatches. or del sols!
this car is not being drove i have another civic as my dd, just dont really have time for this car anymore due to new job.
608-295-9590 text it. or PM me
thanks!
SHELL HAS BEEN TRADED!
SHELL HAS BEEN TRADED!
SHELL HAS BEEN TRADED!
SHELL HAS BEEN TRADED!
SHELL HAS BEEN TRADED!
SHELL HAS BEEN TRADED!
SHELL HAS BEEN TRADED!
well i kinda wanna sell her now......
1994 civic coupe dx.
clean body NO RUST, few dents n such.
-D16Z6
-block hot tanked, honed, resurfaced, notched and painted.
-head hot tanked, resurfaced, 3avj, new stem seals.
-AEM fuel rail
-AEM fpr
-880cc precision injectors
-dsm resistor box
-eagle H-beam rods
-Vitara 75mm pistons
-acl rod and main bearings
-king thrust washers
-16g turbo
-log style turbo mani
-ARP head studs (put in last week)
-cometic head gasket (also last week)
-a/t to m/t solid mount
-new solid motor mounts
-walbro 255 fuel pump
-E85
-short throw
-em1 seats
-chipped p28 on chrome
-coilovers
-greddy axle back
-cf hood
new engine harness in.
car misses and dont wanna idle. the timing is off a few teeth but i have no time to work on this anymore!
the bad-
-no driver side window (have it tho)
-cf hood cracked up from hitting windshield on old car (zip tie band aids)
-no heat due to a tube sock being stuck in the blower motor (don't ask how it got there)
-needs new tail lights
-could use a new starter maybe battery
-comes with the crx si wheels and a set of steelies. not so good tires........
the good-
-rust free
-has potential
-very fun to drive
-fresh head gasket and head studs last week (maybe 3 miles on them)
i am looking to trade it for reliable turbo d's. shell swap for ek hatches. or del sols!
this car is not being drove i have another civic as my dd, just dont really have time for this car anymore due to new job.
608-295-9590 text it. or PM me
thanks!
Last edited by crx6662; 03-31-2011 at 07:42 PM.
03-25-2011, 02:47 AM
#6
Honda-Tech Member
Join Date: Sep 2005
Location: wis!
Posts: 1,144
Likes: 0
Received 0 Likes
on
0 Posts
Re: right hand drive fs/ft
03-25-2011, 03:01 AM
#7
Honda-Tech Member
Thread Starter
Join Date: Jan 2007
Location: B-troit, wi, usa
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Re: right hand drive fs/ft
i have pics on my camera not my phone so i dont have em up, and thanks for the torque wrench for head studs cam!
also still have receipts for gasket and studs.
also still have receipts for gasket and studs.
Trending Topics
03-25-2011, 03:03 AM
#8
Honda-Tech Member
Thread Starter
Join Date: Jan 2007
Location: B-troit, wi, usa
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
03-25-2011, 12:58 PM
#14
Honda-Tech Member
Join Date: Aug 2010
Location: il
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Re: right hand drive fs/ft
its a coupe so its converted. no such thing as a jdm or edm coupe.
i was also present when the cometic gasket and arp studs were installed.
car has lots of potential just needs a owner with the time to put into it.
bump for a good seller. and for a bmw in the first pic lol
i was also present when the cometic gasket and arp studs were installed.
car has lots of potential just needs a owner with the time to put into it.
bump for a good seller. and for a bmw in the first pic lol
03-25-2011, 02:40 PM
#15
Honda-Tech Member
Thread Starter
Join Date: Jan 2007
Location: B-troit, wi, usa
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Re: right hand drive fs/ft
its a coupe so its converted. no such thing as a jdm or edm coupe.
i was also present when the cometic gasket and arp studs were installed.
car has lots of potential just needs a owner with the time to put into it.
bump for a good seller. and for a bmw in the first pic lol
i was also present when the cometic gasket and arp studs were installed.
car has lots of potential just needs a owner with the time to put into it.
bump for a good seller. and for a bmw in the first pic lol
03-26-2011, 09:10 AM
#22
Honda-Tech Member
Thread Starter
Join Date: Jan 2007
Location: B-troit, wi, usa
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
03-27-2011, 01:08 AM
#23
Honda-Tech Member
Thread Starter
Join Date: Jan 2007
Location: B-troit, wi, usa
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Re: right hand drive fs/ft
ttt, also have a 97 dx coupe, very clean i can trade with the rhd for the right car.
ill throw a price on it.......$4,000 obo i just got the new wire harness in tonight.
ill throw a price on it.......$4,000 obo i just got the new wire harness in tonight.
03-27-2011, 10:49 AM
#25
Honda-Tech Member
Join Date: Sep 2004
Location: sioux city, iowa
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Re: right hand drive fs/ft
well i kinda wanna sell her now......
1994 civic coupe dx.
clean body NO RUST, few dents n such.
-D16Z6
-block hot tanked, honed, resurfaced, notched and painted.
-head hot tanked, resurfaced, 3avj, new stem seals.
-AEM fuel rail
-AEM fpr
-880cc precision injectors
-dsm resistor box
-eagle H-beam rods
-Vitara 75mm pistons
-acl rod and main bearings
-king thrust washers
-16g turbo
-log style turbo mani
-ARP head studs (put in last week)
-cometic head gasket (also last week)
-a/t to m/t solid mount
-new solid motor mounts
-walbro 255 fuel pump
-E85
-short throw
-em1 seats
-chipped p28 on chrome
-coilovers
-greddy axle back
-cf hood
here is the deal, the wiring harness is janked out from who ever did the swap and there is random wires everywhere. but i got a new harness for it and plan on getting it in this weekend to clean things up.
the bad-
-no driver side window (have it tho)
-cf hood cracked up from hitting windshield on old car (zip tie band aids)
-no heat due to a tube sock being stuck in the blower motor (don't ask how it got there)
-needs new tail lights
-could use a new starter maybe battery
the good-
-rust free
-has potential
-very fun to drive
-fresh head gasket and head studs last week (maybe 3 miles on them)
i am looking to trade my car for other turbo d's! really want a del sol again.
open to other trades and cash offers!
this car is not being drove i have another civic as my dd, just dont really have time for this car anymore due to new job.
608-295-9590 text it.
thanks!
1994 civic coupe dx.
clean body NO RUST, few dents n such.
-D16Z6
-block hot tanked, honed, resurfaced, notched and painted.
-head hot tanked, resurfaced, 3avj, new stem seals.
-AEM fuel rail
-AEM fpr
-880cc precision injectors
-dsm resistor box
-eagle H-beam rods
-Vitara 75mm pistons
-acl rod and main bearings
-king thrust washers
-16g turbo
-log style turbo mani
-ARP head studs (put in last week)
-cometic head gasket (also last week)
-a/t to m/t solid mount
-new solid motor mounts
-walbro 255 fuel pump
-E85
-short throw
-em1 seats
-chipped p28 on chrome
-coilovers
-greddy axle back
-cf hood
here is the deal, the wiring harness is janked out from who ever did the swap and there is random wires everywhere. but i got a new harness for it and plan on getting it in this weekend to clean things up.
the bad-
-no driver side window (have it tho)
-cf hood cracked up from hitting windshield on old car (zip tie band aids)
-no heat due to a tube sock being stuck in the blower motor (don't ask how it got there)
-needs new tail lights
-could use a new starter maybe battery
the good-
-rust free
-has potential
-very fun to drive
-fresh head gasket and head studs last week (maybe 3 miles on them)
i am looking to trade my car for other turbo d's! really want a del sol again.
open to other trades and cash offers!
this car is not being drove i have another civic as my dd, just dont really have time for this car anymore due to new job.
608-295-9590 text it.
thanks!