Chicago & Illinois: FS/FT WTB, November 2007
#127
Honda-Tech Member
Join Date: May 2003
Location: Around Town, IL
Posts: 2,808
Likes: 0
Received 0 Likes
on
0 Posts
Re: (HYPROPULSION_R)
Going back to school sale!
- B16 ARP headstuds, brand new - $100
- JDM YS1 LSD transmission - $600
- Hasport motor mounts painted black - $175
- ACT heavy duty pressure plate w/6 puck unsprung disc, 1500 miles - $180
- DSM 450cc blue top injectors - $50
- OBD0-OBD1 conversion harness, brand new - $60
- Blox B series turbo manifold, brand new - $175
- Tial 38mm wastegate, used missing fire ring - $140
1991 Honda CRX Si shell
http://www.hondamarketplace.co...45980
Modified by paopao at 10:02 AM 11/8/2007
- B16 ARP headstuds, brand new - $100
- JDM YS1 LSD transmission - $600
- Hasport motor mounts painted black - $175
- ACT heavy duty pressure plate w/6 puck unsprung disc, 1500 miles - $180
- DSM 450cc blue top injectors - $50
- OBD0-OBD1 conversion harness, brand new - $60
- Blox B series turbo manifold, brand new - $175
- Tial 38mm wastegate, used missing fire ring - $140
1991 Honda CRX Si shell
http://www.hondamarketplace.co...45980
Modified by paopao at 10:02 AM 11/8/2007
#132
Junior Member
Join Date: Aug 2003
Location: lombard, il, united states
Posts: 667
Likes: 0
Received 0 Likes
on
0 Posts
Re: (na_rsx)
ok got a question, i have an a6 head on a d15b7 and am told that i need a d16yx cam gear to make up for the deck height difference? can anyone confirm this?
and if it is true then im gonna need to buy someones d16yx cam gear
and if it is true then im gonna need to buy someones d16yx cam gear
#138
Re: Chicago & Illinois: FS/FT WTB, November 2007 (Honda_Fanatic)
FS: Stock 06 Honda accord wheels and tires combo 16" and perfect condition with 2k miles on them...no need this anymore...asking 1000.00
PM me if ur interested
PM me if ur interested
#139
Junior Member
Join Date: Jan 2004
Location: Ill State, il
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
1 16" Honda Accord 05-07 Rim Wheel OEM
http://chicago.craigslist.org/....html
1 16" alloy wheel honda-civic 06-07 EX
http://chicago.craigslist.org/....html
front headlights for 06-08 honda pilot like new bo
2 pass. side accord coupe door visor 03-07 new bo
integra dark grey cloth headrest $10
http://chicago.craigslist.org/....html
1 16" alloy wheel honda-civic 06-07 EX
http://chicago.craigslist.org/....html
front headlights for 06-08 honda pilot like new bo
2 pass. side accord coupe door visor 03-07 new bo
integra dark grey cloth headrest $10
#140
Honda-Tech Member
Join Date: Jun 2004
Location: Northern.IL, IL, United States
Posts: 2,401
Likes: 0
Received 0 Likes
on
0 Posts
Re: (dvela85)
I saw paopao's CRX for sale in person and it is clean with nice paint.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by paopao »</TD></TR><TR><TD CLASS="quote">
Modified by paopao at 9:30 AM 11/8/2007</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by paopao »</TD></TR><TR><TD CLASS="quote">
Modified by paopao at 9:30 AM 11/8/2007</TD></TR></TABLE>
#141
Honda-Tech Member
Join Date: Jun 2004
Location: Northern.IL, IL, United States
Posts: 2,401
Likes: 0
Received 0 Likes
on
0 Posts
Re: (civicflow)
Or buy my civic hatch with B16
FS/TW: 91 Honda Civic hatchback with obd0 B16 motor/trans
Motor runs perfect. Trans has 3rd gear grind. No rust on body of car. Car came from Kentucky. Body has 218,000 miles. Motor/tranny have about 80,000 miles.
$3100 OBO Price lowered
The Good:
-New timing belt and valve cover gaskets
-New Competion Clutch
-GSR armrest and shifter cover
-Semi-wire tuck
-Odyssey 680 battery relocated below old stock mounting point
-EG intake wrapped with header wrap
-P30 intake manifold(looks cleaner than the old obd0 one)
-Full Si interior except guage cluster
-Autometer 3 1'2 inch tach
-Drivers seat has a tiny tear from wear but otherwise good condition
-Converted to obd1 w/P06 ecu running a B16 Map
-New distributor
-New starter
-VW front lip
-Invidia cat back exhaust with Magnaflow cat
-stock header w/heat shield
-BFG drag radials mounted on 89 CRX SI rims. I also have three more 89 CRX Si rims and 4 steelies with good tires. I was going to put 2 of the tires on the CRX Si rims but havn't done it yet.
The Bad:
-High Rpm Third gear grind
-Needs new suspension bushings installed and balljoints(which I will include not installed)
-Has EG DX front knuckles and the brakes are about gone
-Paint is faded and passenger side front fender has a dent
-There is some surface rust in the trunk from a water leak. pic below
-Wiring is all intact but some wires could be soldered. I don't have power in my garage.
Extra parts that will come with but not installed:
-Energy suspension master bushing kit
-91 4 door EX front knuckles/calipers w/new lower balljoints pressed in
-New upper control arms, inner/outer tie rods, and sway bar links
-New poly radius rod bushings
Feel free to ask any questions by PM. I am located in by Rockford, IL
The Buy my stuff before I get laid off from Chrysler Sale!
I am located in Stillman Valley, IL 61084(7 miles south of Rockford)
FS: GSR cams-$55 shipped
FS: B18 block-knifedged ls crank, shot peened ls rods, ctr pistons.
About 15,000 miles. $450 obo
FS: ys1 lsd cable tranny-no grinds- $650 pic below
FS: JG Edelbrock 4-2-1 b18 header with modified 2.5 in outlet- Pending
FS: used B series cable trans starter-make offer!
FS: SPC EF camber kit. Replaces upper ball joint. $50
I have in red from a 91 honda civic si: front bumper(no lip), pair of red doors w/glass, a red hatch w/glass and stock wing. Best offer
90-91 civic hatchback SI seats, drivers seat has usual tear. $65 picked up
Red rear hatch( I do have the stock wing just not pictured) $50 picked up
DA rear trans bracket $50 shipped
DOHC ZC dizzy obd0 -$40 used
PM6 ecu (virgin and chipable)- $50, shipping extra
Fuel Pressure Guage-screws into Honda fuel filter- $40 shipped
SS Blaster with Wire- $30 shipped
Autometer Boost Guage(w/ vacuum lines/fittings)- $45 shipped
Autometer Oil Pressure Guage(w/sending unit)- $45 shipped
PM5 and PM8 ECU's- $35 shipped each
]
SOLD:
XBOX 360 20GB- Traded it
FS: B16/ITR ITB's Sold
DSM 2nd Gen Eclipse/3000gt BOV- Sold
Walbro Fuel Pump 255 with 88-91 crx/civic install kit- Sold
DSM 450 Blue Top Injectors(I do have all new caps for em)-Sold
15x7 ASA wheels Tires are junk -traded
FS/TW: 91 Honda Civic hatchback with obd0 B16 motor/trans
Motor runs perfect. Trans has 3rd gear grind. No rust on body of car. Car came from Kentucky. Body has 218,000 miles. Motor/tranny have about 80,000 miles.
$3100 OBO Price lowered
The Good:
-New timing belt and valve cover gaskets
-New Competion Clutch
-GSR armrest and shifter cover
-Semi-wire tuck
-Odyssey 680 battery relocated below old stock mounting point
-EG intake wrapped with header wrap
-P30 intake manifold(looks cleaner than the old obd0 one)
-Full Si interior except guage cluster
-Autometer 3 1'2 inch tach
-Drivers seat has a tiny tear from wear but otherwise good condition
-Converted to obd1 w/P06 ecu running a B16 Map
-New distributor
-New starter
-VW front lip
-Invidia cat back exhaust with Magnaflow cat
-stock header w/heat shield
-BFG drag radials mounted on 89 CRX SI rims. I also have three more 89 CRX Si rims and 4 steelies with good tires. I was going to put 2 of the tires on the CRX Si rims but havn't done it yet.
The Bad:
-High Rpm Third gear grind
-Needs new suspension bushings installed and balljoints(which I will include not installed)
-Has EG DX front knuckles and the brakes are about gone
-Paint is faded and passenger side front fender has a dent
-There is some surface rust in the trunk from a water leak. pic below
-Wiring is all intact but some wires could be soldered. I don't have power in my garage.
Extra parts that will come with but not installed:
-Energy suspension master bushing kit
-91 4 door EX front knuckles/calipers w/new lower balljoints pressed in
-New upper control arms, inner/outer tie rods, and sway bar links
-New poly radius rod bushings
Feel free to ask any questions by PM. I am located in by Rockford, IL
The Buy my stuff before I get laid off from Chrysler Sale!
I am located in Stillman Valley, IL 61084(7 miles south of Rockford)
FS: GSR cams-$55 shipped
FS: B18 block-knifedged ls crank, shot peened ls rods, ctr pistons.
About 15,000 miles. $450 obo
FS: ys1 lsd cable tranny-no grinds- $650 pic below
FS: JG Edelbrock 4-2-1 b18 header with modified 2.5 in outlet- Pending
FS: used B series cable trans starter-make offer!
FS: SPC EF camber kit. Replaces upper ball joint. $50
I have in red from a 91 honda civic si: front bumper(no lip), pair of red doors w/glass, a red hatch w/glass and stock wing. Best offer
90-91 civic hatchback SI seats, drivers seat has usual tear. $65 picked up
Red rear hatch( I do have the stock wing just not pictured) $50 picked up
DA rear trans bracket $50 shipped
DOHC ZC dizzy obd0 -$40 used
PM6 ecu (virgin and chipable)- $50, shipping extra
Fuel Pressure Guage-screws into Honda fuel filter- $40 shipped
SS Blaster with Wire- $30 shipped
Autometer Boost Guage(w/ vacuum lines/fittings)- $45 shipped
Autometer Oil Pressure Guage(w/sending unit)- $45 shipped
PM5 and PM8 ECU's- $35 shipped each
]
SOLD:
XBOX 360 20GB- Traded it
FS: B16/ITR ITB's Sold
DSM 2nd Gen Eclipse/3000gt BOV- Sold
Walbro Fuel Pump 255 with 88-91 crx/civic install kit- Sold
DSM 450 Blue Top Injectors(I do have all new caps for em)-Sold
15x7 ASA wheels Tires are junk -traded
#142
Honda-Tech Member
Join Date: May 2003
Location: Around Town, IL
Posts: 2,808
Likes: 0
Received 0 Likes
on
0 Posts
Re: (civicflow)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civicflow »</TD></TR><TR><TD CLASS="quote">Or buy my civic hatch with B16</TD></TR></TABLE>
Yeah, they're damn near the same price! Way to make me look like an ***!
Yeah, they're damn near the same price! Way to make me look like an ***!
#143
Honda-Tech Member
Join Date: Jun 2004
Location: Northern.IL, IL, United States
Posts: 2,401
Likes: 0
Received 0 Likes
on
0 Posts
Re: (paopao)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by paopao »</TD></TR><TR><TD CLASS="quote">
Yeah, they're damn near the same price! Way to make me look like an ***! </TD></TR></TABLE>
lol, you never posted a price here. Not wanting to hate on your rex
Your CRX is clean and I love the color!
So if ya want a CRX buy paopao's,
If ya want a EF Civic hatch-buy mine.
Yeah, they're damn near the same price! Way to make me look like an ***! </TD></TR></TABLE>
lol, you never posted a price here. Not wanting to hate on your rex
Your CRX is clean and I love the color!
So if ya want a CRX buy paopao's,
If ya want a EF Civic hatch-buy mine.
#144
Honda-Tech Member
Join Date: Dec 2005
Location: Around, IL
Posts: 1,373
Likes: 0
Received 0 Likes
on
0 Posts
Re: Chicago & Illinois: FS/FT WTB, November 2007 (chubz0r)
I have the following items for sale.
<U>FOR SALE: </U> All of the items I have for sale are in perfect condition unless otherwise noted.
TurboXS Dual Stage Boost Controller $175
Precision 1000cc Injectors (used for less than 2000 miles) $265
Walbro 255lph HP fuel pump (brand new) $95
Resistor Box $25
Competition Clutch Stage 5 w/ upgraded pressure plate(cost $100 more) (b series hydro trans) (used for less than 2000 miles) $400
24.5x9x13 Slicks (Used for 6 runs) SOLD
Walbro 255lph HP fuel pump (brand new) $95
Walbro 190lph fuel pump (used for less than 2000 miles) $55
GSR cams w/ stock cam gears (great condition, 80K miles) $80
Stock GSR valvetrain (springs, retainers, valves) $Best offer
Blox Intake Manifold for GSR head (used but perfect condition) $140
<U>Want To Buy:</U>
Beater, looking to spend ~3K (must be manual and pretty clean)
If you have any questions or are interested in anything I have for sale, pm me or email me @ iconz116@hotmail.com
Modified by chubz0r at 1:17 AM 11/9/2007
Modified by chubz0r at 3:33 AM 11/11/2007
<U>FOR SALE: </U> All of the items I have for sale are in perfect condition unless otherwise noted.
TurboXS Dual Stage Boost Controller $175
Precision 1000cc Injectors (used for less than 2000 miles) $265
Walbro 255lph HP fuel pump (brand new) $95
Resistor Box $25
Competition Clutch Stage 5 w/ upgraded pressure plate(cost $100 more) (b series hydro trans) (used for less than 2000 miles) $400
24.5x9x13 Slicks (Used for 6 runs) SOLD
Walbro 255lph HP fuel pump (brand new) $95
Walbro 190lph fuel pump (used for less than 2000 miles) $55
GSR cams w/ stock cam gears (great condition, 80K miles) $80
Stock GSR valvetrain (springs, retainers, valves) $Best offer
Blox Intake Manifold for GSR head (used but perfect condition) $140
<U>Want To Buy:</U>
Beater, looking to spend ~3K (must be manual and pretty clean)
If you have any questions or are interested in anything I have for sale, pm me or email me @ iconz116@hotmail.com
Modified by chubz0r at 1:17 AM 11/9/2007
Modified by chubz0r at 3:33 AM 11/11/2007
#145
Member
Join Date: Oct 2005
Location: www.downshiftmotoring.com, PA, usa
Posts: 1,182
Likes: 0
Received 0 Likes
on
0 Posts
JDM Long Blocks for Sale
I have some JDM long blocks for sale. Low miles on the engines and have 100% startup. Here is what I have. PM or call me for more info: 219-808-6406 Adam
JDM B18C GSR Long Block - 2400 shipped
JDM H22A Long Block - 1450 shipped
JDM B20 Long Block - 750 shipped
Prices are shipped to a business with forklift available.
I also have these recaros... 950 to your door. USDM driver is mint the passenger will need some cleaning I have seen people work wonders. These arent worn just a little dirty and need some luv on the passenger side.
Modified by Down Shift Motoring at 3:15 PM 11/8/2007
JDM B18C GSR Long Block - 2400 shipped
JDM H22A Long Block - 1450 shipped
JDM B20 Long Block - 750 shipped
Prices are shipped to a business with forklift available.
I also have these recaros... 950 to your door. USDM driver is mint the passenger will need some cleaning I have seen people work wonders. These arent worn just a little dirty and need some luv on the passenger side.
Modified by Down Shift Motoring at 3:15 PM 11/8/2007
#146
Honda-Tech Member
Join Date: Mar 2005
Location: my house, Il, us
Posts: 848
Likes: 0
Received 0 Likes
on
0 Posts
Re: JDM Long Blocks for Sale (Down Shift Motoring)
The BlackBerry® 8830 World Edition - $250 firm
brand new verizon blackberry. comes with leather case and usb charger. no box or manual. pm me with questions
brand new verizon blackberry. comes with leather case and usb charger. no box or manual. pm me with questions
#148
Member
Join Date: Apr 2004
Location: Chicago, IL, USA
Posts: 2,284
Likes: 0
Received 0 Likes
on
0 Posts
Re: d16a6 si intake manifold mpfi, pm6 si ecu, d15b2 dx camshaft, rx8 wheels (SILVER97EX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SILVER97EX »</TD></TR><TR><TD CLASS="quote">http://www.hondamarketplace.co...29131
</TD></TR></TABLE>
</TD></TR></TABLE>