TW: 1999 Acura Integra LS Sedan (Buddy Club,PWJDM,Beaks,etc)
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2009
Location: Bel Air, MD
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
TW: 1999 Acura Integra LS Sedan (Buddy Club,PWJDM,Beaks,etc)
I've had my Integra for about 2 years now, and I'm starting to get a little bored. Just starting to look at what else is out there and what I could get for mine.
I bought this car from an Acura technician, and it was very well taken care of, still 100% stock. I've taken good care of her as well, and I've never had a problem.
1999 Acura Integra LS Sedan; 5spd.
100k original miles.
Engine:
-Password:JDM carbon intake
-SpooledupRacing 4-2-1 header (vendor on ClubIntegra)
-Invidia test pipe w/ O2 Spacer
-Buddy Club Pro Spec catback exhaust
-Gunmetal painted valve cover
Exterior:
-ViS carbon fiber spoon style front lip (Zip-stitched; broken)
-Rear valances
-OEM headlights with black shrouds and yellow painted high beam reflectors
-Type R replica rear wing
-12000k HIDs w/ relay harness
-Gunmetal painted Honda emblems
-OEM mud flaps (only front on due to rear valances)
-OEM style yellow fog
-front turn signals painted gloss black (will probably be reverting this)
-"dohc non vtec" decal lol
Suspension:
-Beaks candy red rear lower tie bar
-D5 Concepts 3pt Strut Bar in gunmetal
-Eibach Ground Control coilover sleeves
-KYB AGX shocks
-Buddy Club rear camber kit
-16x7.5 +32 Kosei K1 wheels in gunmetal w/ Kuhmo Ecsta AST (205/45/16)
Interior:
-Buddy Club Type A shift ****
-Sony head unit
-OEM TSX floor mats
-Wink mirror
-Corbeau FX1 seat (wide)
-Silver ring around gauges in cluster w/ pedobear sticker
That's all I can think of as far as mods right now, but there's probably a few little things I'm forgetting. I also have a garage full of stock parts I'm including.
Just did new spark plugs and wires, distributor cap and rotor, and this weekend I'll be doing new brake pads and rotors all around as well as an oil change.
Only negatives I can think of:
-Pass. side fender and small part of bumper are rattlecan matched, this was due to sliding into a guardrail in the winter. All that was damaged was the fender and bumper, so I replaced the fender and painted them with a color matched can. It turned out pretty well but its not a perfect match.
-Wheels need to be painted one color, I started stripping one side and just have to finish. I'll be doing this soon however.
-Driver side rear quarter has rust starting and it should probably be taken care of before it gets worse.
Feel free to ask any questions,
You can either PM me or text me at 443-616-7705.
I'm open to trades, but I'd rather sell. Kinda looking to get out of the Honda game.
I'd like to get around $6200 obo.
Pics:
Thanks!
I bought this car from an Acura technician, and it was very well taken care of, still 100% stock. I've taken good care of her as well, and I've never had a problem.
1999 Acura Integra LS Sedan; 5spd.
100k original miles.
Engine:
-Password:JDM carbon intake
-SpooledupRacing 4-2-1 header (vendor on ClubIntegra)
-Invidia test pipe w/ O2 Spacer
-Buddy Club Pro Spec catback exhaust
-Gunmetal painted valve cover
Exterior:
-ViS carbon fiber spoon style front lip (Zip-stitched; broken)
-Rear valances
-OEM headlights with black shrouds and yellow painted high beam reflectors
-Type R replica rear wing
-12000k HIDs w/ relay harness
-Gunmetal painted Honda emblems
-OEM mud flaps (only front on due to rear valances)
-OEM style yellow fog
-front turn signals painted gloss black (will probably be reverting this)
-"dohc non vtec" decal lol
Suspension:
-Beaks candy red rear lower tie bar
-D5 Concepts 3pt Strut Bar in gunmetal
-Eibach Ground Control coilover sleeves
-KYB AGX shocks
-Buddy Club rear camber kit
-16x7.5 +32 Kosei K1 wheels in gunmetal w/ Kuhmo Ecsta AST (205/45/16)
Interior:
-Buddy Club Type A shift ****
-Sony head unit
-OEM TSX floor mats
-Wink mirror
-Corbeau FX1 seat (wide)
-Silver ring around gauges in cluster w/ pedobear sticker
That's all I can think of as far as mods right now, but there's probably a few little things I'm forgetting. I also have a garage full of stock parts I'm including.
Just did new spark plugs and wires, distributor cap and rotor, and this weekend I'll be doing new brake pads and rotors all around as well as an oil change.
Only negatives I can think of:
-Pass. side fender and small part of bumper are rattlecan matched, this was due to sliding into a guardrail in the winter. All that was damaged was the fender and bumper, so I replaced the fender and painted them with a color matched can. It turned out pretty well but its not a perfect match.
-Wheels need to be painted one color, I started stripping one side and just have to finish. I'll be doing this soon however.
-Driver side rear quarter has rust starting and it should probably be taken care of before it gets worse.
Feel free to ask any questions,
You can either PM me or text me at 443-616-7705.
I'm open to trades, but I'd rather sell. Kinda looking to get out of the Honda game.
I'd like to get around $6200 obo.
Pics:
Thanks!
#3
Honda-Tech Member
Thread Starter
Join Date: Jul 2009
Location: Bel Air, MD
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Re: TW: 1999 Acura Integra LS Sedan (Buddy Club,PWJDM,Beaks,etc)
Ebay actually, there's typically 2 sellers that have em, but one set is more of a rounded design. Just search integra 4dr rear valance. I think they were like $80 shipped.
#4
Honda-Tech Member
Join Date: Feb 2007
Location: hagerstown, maryland, us
Posts: 821
Likes: 0
Received 0 Likes
on
0 Posts
Re: TW: 1999 Acura Integra LS Sedan (Buddy Club,PWJDM,Beaks,etc)
Clean car, ive always liked.....im in process of doing my 98 db8, same color as urs and all
Thread
Thread Starter
Forum
Replies
Last Post