94SiRswap

So here's where I'm at.I Have the opportunity to grab a bubble with a full running a3 swap in it for relatively cheap. I want to do a full all motor build,may it be in my coupe I have with a b series,or maybe this bubble with the K series.
Obviously Id rather Build a K,with funds permitting.With that being said,If I plan on doing a full build up (pistons rods head cams bolts on etc) Whats my best option with this car

A.Swap a2 (or a) crank into a3 block with aftermarket a2 pistons and rods,with a a2 (or a) head swap, head work and built vvalvetrain.Kpro

B.pull the K20a3 and throw in a complete K20a(2) and build that



Since the K20a3 is already in the bubble and running/driving,the k20a swap should be a bolt in affair right?less the ecu_



I might actually have a freaking K car before Honda comes out with another series of motors!!!!!

GoldieWang

if I were in that predicament I would just sell the a3 and buy a good k20a2 for it.