I'm New to the Teggy Worl!!!!!
05-14-2014, 10:25 AM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2014
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
I'm New to the Teggy Worl!!!!!
Ok, Sooo the names Drew,
I just Bought a 1996 Acura Integra LS coupe B18b. I paid $1800 for it because it had quite a few problems, But I just want some Advice to what I should get and how I can go about getting good cheap priced quality equipment.
Lets start with the Engine light.
OBD2 Codes are: P0700 & P1791, I dot know what these mean so if you guys could help me out that'll be great.
I know it needs an Alignment because I took it in and it was soo unaligned that they couldn't perform the alignment.
It needs; Lower Control Arms, All Tie Rod Ends, and a Rack&Pinion Assembly.
Any Ideas on where to get the parts and the easiest way to do it with out Power or Air Tools??
Please help me and thanks fellow Honda/Acura Fans.
I just Bought a 1996 Acura Integra LS coupe B18b. I paid $1800 for it because it had quite a few problems, But I just want some Advice to what I should get and how I can go about getting good cheap priced quality equipment.
Lets start with the Engine light.
OBD2 Codes are: P0700 & P1791, I dot know what these mean so if you guys could help me out that'll be great.
I know it needs an Alignment because I took it in and it was soo unaligned that they couldn't perform the alignment.
It needs; Lower Control Arms, All Tie Rod Ends, and a Rack&Pinion Assembly.
Any Ideas on where to get the parts and the easiest way to do it with out Power or Air Tools??
Please help me and thanks fellow Honda/Acura Fans.
Thread
Thread Starter
Forum
Replies
Last Post
johnmota
Honda Civic / Del Sol (1992 - 2000)
34
09-11-2015 06:53 AM
Calderone
Honda Accord (1990 - 2002)
6
08-05-2011 06:36 PM