95 EG stance on Diamond Racing
10-14-2013, 07:18 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2013
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
hi everyone im new to this forum just wanted to introduce my car and see what people have to say about it and to share there carz.
please feel free to post pix and share what you have on your car
this EG is sitting on
16x8 +12 offset diamond racing wheels wrapped in federal evo959 165/40R16 in the front
and
16x10 +/- 0 offset diamond racing wheels wrapped in federal evo959 195/40R16 in the rear
I do have an aggressive camber in the rear it is stock in the front neuspeed race springs cut 1 coil
im think of putting spacers on the front and adjusting the camber to bring the tires out further so they will have more of a flush stance what do you think?
please feel free to post pix and share what you have on your car
this EG is sitting on
16x8 +12 offset diamond racing wheels wrapped in federal evo959 165/40R16 in the front
and
16x10 +/- 0 offset diamond racing wheels wrapped in federal evo959 195/40R16 in the rear
I do have an aggressive camber in the rear it is stock in the front neuspeed race springs cut 1 coil
im think of putting spacers on the front and adjusting the camber to bring the tires out further so they will have more of a flush stance what do you think?
Last edited by Ron Arouas; 10-21-2013 at 07:58 AM.
10-21-2013, 07:50 AM
#4
Honda-Tech Member
Thread Starter
Join Date: Sep 2013
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
here's some updates
http://i1179.photobucket.com/albums/...ps07264097.jpg
http://i1179.photobucket.com/albums/...ps064350f0.jpg
[IMG]
[/IMG]
[IMG]
[/IMG]
still needs a lil fine tunning
well I haven't had any problems as of yet but I do drive very def. watching out for railroad crossing and pot holes
yes I really like the look one the wheels tell me what you think of the new stance and camber I think I still need to fine tune it
http://i1179.photobucket.com/albums/...ps07264097.jpg
http://i1179.photobucket.com/albums/...ps064350f0.jpg
[IMG]
[/IMG][IMG]
[/IMG]
still needs a lil fine tunning
well I haven't had any problems as of yet but I do drive very def. watching out for railroad crossing and pot holes
yes I really like the look one the wheels tell me what you think of the new stance and camber I think I still need to fine tune it
Last edited by toyomatt84; 12-13-2013 at 06:45 PM.
10-28-2013, 07:04 AM
#7
Honda-Tech Member
Thread Starter
Join Date: Sep 2013
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
well the 0 offset will give you a lil problem you will def. need an aggressive front and rear camber on the car other then that you will be fine since your going with 15's your tires should be really cheap look up federal tires on ebay that should help
Last edited by toyomatt84; 12-13-2013 at 06:45 PM.
Trending Topics
10-28-2013, 07:22 AM
#8
Honda-Tech Member
10-28-2013, 10:55 AM
#9
Honda-Tech Member
Thread Starter
Join Date: Sep 2013
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
and I usually hate changing the corners and headlight from original but I really liked the clean look of these I felt the front needed a lil updating anfd I found nothing else that I liked oh incase you haven't noticed I changed the tail lights as well you should see it clearly ion one of the pix I posted
this is my last civic I traded for the red EG that I have now
[IMG]
[/IMG]I have had no problems still the tires I got are extremely well built
you might need to call in the order there web site is on the fritz and that's what I ended up doing pricing is really fair compared to privet company's that carry them 15x8 0 offset should run about $100 each powder coated white
1 thing is don't expect them to be flawless you will see weld marks on them that's just how they come remember these are not bling, bling, rims these are actual racing rims made for nascar and other Organizations in like category's shipping is fair they are located in Milwaukee I live in so cal and paid $115. they also are made to order and usually ship within 3 days now if its nascar season expect a 3 month delay this is what the lady "Karen" that works there told me
good luck hope this helped you out
Last edited by toyomatt84; 12-13-2013 at 06:46 PM.
10-28-2013, 11:19 AM
#10
Honda-Tech Member
Join Date: Aug 2010
Posts: 910
Likes: 0
Received 0 Likes
on
0 Posts
Re: 95 EG stance on Diamond Racing
well I guess its all personal opinion I personally like the mirrors but you have a good eye to catch that I am changing the lca's to BWR and adding BWR rear sub frame brace and BWR lower tie bar just waiting for it to arrive
and I usually hate changing the corners and headlight from original but I really liked the clean look of these I felt the front needed a lil updating anfd I found nothing else that I liked oh incase you haven't noticed I changed the tail lights as well you should see it clearly ion one of the pix I posted
and I usually hate changing the corners and headlight from original but I really liked the clean look of these I felt the front needed a lil updating anfd I found nothing else that I liked oh incase you haven't noticed I changed the tail lights as well you should see it clearly ion one of the pix I posted
10-28-2013, 01:12 PM
#13
Honda-Tech Member
Thread Starter
Join Date: Sep 2013
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
but like I said ppl I am open to suggestions for mod's I am thinking of buying the duckbill wing what is out there that u like or have on your carz!
PLEASE FEEL FREE TO POST YOUR PIX IN HERE
Last edited by toyomatt84; 12-13-2013 at 06:46 PM.
10-28-2013, 02:14 PM
#14
Honda-Tech Member
Join Date: Aug 2010
Posts: 910
Likes: 0
Received 0 Likes
on
0 Posts
10-29-2013, 05:59 AM
#15
Honda-Tech Member
Re: 95 EG stance on Diamond Racing
Too bad naive op didn't do a search on the products he already bought before actually making the purchase. If he did, he would have realized bwr suspension products suck donkey *****.
So like I said before....in my opinion, the car has more potential then whats being thrown at it. Just more and more cheap *** crap making its way onto the car.
So like I said before....in my opinion, the car has more potential then whats being thrown at it. Just more and more cheap *** crap making its way onto the car.
11-04-2013, 07:58 AM
#16
Honda-Tech Member
Thread Starter
Join Date: Sep 2013
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
i didnt know BWR was a bad product what seems to be the problem with it?
what brand would you suggest?
same question what seems to be the problem with BWR everyone i asked that is into hondas seem to love there products
what would u suggest instead and where could i find it?
just installed the BWR sub frame bar and the Beaks lower tie bar i will have pix in a few hours
what brand would you suggest?
Too bad naive op didn't do a search on the products he already bought before actually making the purchase. If he did, he would have realized bwr suspension products suck donkey *****.
So like I said before....in my opinion, the car has more potential then whats being thrown at it. Just more and more cheap *** crap making its way onto the car.
So like I said before....in my opinion, the car has more potential then whats being thrown at it. Just more and more cheap *** crap making its way onto the car.
what would u suggest instead and where could i find it?
just installed the BWR sub frame bar and the Beaks lower tie bar i will have pix in a few hours
Last edited by toyomatt84; 12-13-2013 at 06:47 PM.
11-08-2013, 01:07 PM
#18
Honda-Tech Member
Join Date: Aug 2010
Posts: 910
Likes: 0
Received 0 Likes
on
0 Posts
Re: 95 EG stance on Diamond Racing
LCAs - OEM > Function7 > Skunk2/Buddy Blub/Hardrace (with Energy bushings) > BWR/Blox/etc.
Subframe Brace - are you running a sway bar? if you are not, take it off and get some of your money back because it's pointless.
Lower Tie Bar - bling factory only.. resell, make some money back, and invest it into preventative maintenance (oil change, plugs, wires, etc.). genuine OEM parts, or something that will actually make your car perform better................but considering you're going for the hellaslammedbrocursivewritingstickerhashtageinstag rammebro style... i doubt Functionality and safety are high on your list of modifications.
11-08-2013, 06:18 PM
#19
Honda-Tech Member
Re: 95 EG stance on Diamond Racing
You should have gone with a fuction7 brace. Not even that much more coin for one, and much much better quality.
12-13-2013, 06:37 PM
#20
Honda-Tech Member
Thread Starter
Join Date: Sep 2013
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Re: 95 EG stance on Diamond Racing
If there is no sway bar attached, dont even bother posting up pics. Nothing worse than a bwr brace with a useless tie bar and not even having a sway bay.
You should have gone with a fuction7 brace. Not even that much more coin for one, and much much better quality.
You should have gone with a fuction7 brace. Not even that much more coin for one, and much much better quality.
12-23-2013, 11:02 AM
#22
Honda-Tech Member
Thread Starter
Join Date: Sep 2013
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
12-23-2013, 12:25 PM
#25
Honda-Tech Member
Join Date: Dec 2013
Location: South west burbs of Chicago
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Re: 95 EG stance on Diamond Racing
Op you are such a possitive person lmao.. ::insert **** talking here:: "thanks, good idea!" man i couldnt hold my tongue like that..
Not my cup of tea but hey.. if everyone had the same style this would be a ridiculously boring world. do what you do!
Not my cup of tea but hey.. if everyone had the same style this would be a ridiculously boring world. do what you do!