Hi

I have just put a D16Y8 in my 1997 EK3
The Y8 needs a four wire o2 sensor.
My old D15Z6 only used a 1 wire sensor.
I am wiring it just now and need a bit of guidance
I need to check my wiring is right

This is for my ecu

Connector A

6 - Heater Control

Connector D

7 - Sensor 1

11/12 - Sensor Ground

My o2 sensor wiring is
(got this from NGK)

Signal - Black
Ground - Gery
Heater - 2 x White

Now.....

I think my wiring goes

6 - Heater Control to Heater - White
I have two wires here what do i do ?

7 - Sensor 1 to Signal - Black

11/12 - Sensor Ground to Ground - Grey
I all ready have wire in these do i just splice these together ?
Or can i use any good ground ?

Does that look right ?
Am i missing anything ??

Cheers for any help !!

R883

 

Can no one help ?
Want to get this done before it gets dark