im thinking about swapping the 3.2 v6 into a civic HB, does anyone have any information about this? ive searched and have found limited information on the subject, hasport is supposed to come out with a mount kit, anyone make pistons rods cams etc for this engine?
any help is greatly appreciated.

 

bump. anyone?

 

there is very little information on this swap. although it has been done before. as far as internals, there is probably very little aftermarket support.

 

ive heard that CP charges the same for custom pistons as they do for shelf pistons, so i dont think that will be a problem, and im considering aluminum GRP rods which are usually custom anyways.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nitrocacklefest &raquo;</TD></TR><TR><TD CLASS="quote">Hasport is supposed to come out with a mount kii</TD></TR></TABLE>

Looks good from what I've seen... though it seems like nothing has been made public yet?????

 

that one seems like it would have hood clearance issues, most of the ones ive seen the hood closes fine, but im guessing there wasnt much clearance for the pan so hasport moved it up a little more.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nitrocacklefest &raquo;</TD></TR><TR><TD CLASS="quote">im guessing there wasnt much clearance for the pan so hasport moved it up a little more.</TD></TR></TABLE>
Have no idea, if I had a V6 swap I could care less about closing a hood

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 88ED8 &raquo;</TD></TR><TR><TD CLASS="quote">
Have no idea, if I had a V6 swap I could care less about closing a hood </TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 88ED8 &raquo;</TD></TR><TR><TD CLASS="quote">
Have no idea, if I had a V6 swap I could care less about closing a hood </TD></TR></TABLE>

x1000 lol

 

its nothing too too crazy and the swap will cost around the same as a k series