Type R camshafts and valvetrain, what parts do I need?
08-07-2002, 07:43 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2002
Location: Portland, OR, USA
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
Type R camshafts and valvetrain, what parts do I need?
Ok, next mod for my car is CTR intake cam, and ITR exhaust cam. I'm also upgrading the valvetrain to ITR specs. I'm just unsure of what parts exactly I need, and how many of each (I assume 16) Can somebody check out this website and tell me what parts I need? Thanks.
http://www.acuraautomotiveparts.net/...ER+ARM+%282%29
http://www.acuraautomotiveparts.net/...ER+ARM+%282%29
08-07-2002, 08:04 PM
#2
Join Date: Jun 2002
Location: u.s.a
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
Re: Type R camshafts and valvetrain, what parts do I need? (CivicEx95)
you can move the stock intake springs to exhaust side and just buy the itr intake springs. cam gears, vtec controller (vafc, so you can adjust the vtec point), are needed and take it to a dyno to get the most out of it... a skunk2 manifold and jdm r pistons are not a bad idea either.
08-07-2002, 08:18 PM
#3
Junior Member
Thread Starter
Join Date: Mar 2002
Location: Portland, OR, USA
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
Re: Type R camshafts and valvetrain, what parts do I need? (Rspool)
I already have a skunk2 manifold. I plan to buy a chipped P28 ECU. How high can the stock intake springs on the exhuast side rev to? Do I need to buy anything else other than the ITR intake springs?
08-08-2002, 11:26 AM
#4
Member
Join Date: Dec 2001
Location: Bay Area, in the bay man, CA, USA
Posts: 1,278
Likes: 0
Received 0 Likes
on
0 Posts
Re: Type R camshafts and valvetrain, what parts do I need? (CivicEx95)
08-08-2002, 11:54 AM
#5
Join Date: May 2002
Location: POWERLINE, norcal, usa
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
Re: Type R camshafts and valvetrain, what parts do I need? (bluesaint)
the GSR intake springs are the same as the ITR exhaust springs....so rev to what ever the ITR can go.
08-08-2002, 12:12 PM
#6
Join Date: Jul 2002
Location: Dallas, TX, USA
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Re: Type R camshafts and valvetrain, what parts do I need? (bluesaint)
[QUOTE]You can buy my brand new ITR valvesprings+ retainer.
[QUOTE]
I would recommend getting either ITR retainers or some titanium. The portflows run about $160 for a set.
Thanks, J
[QUOTE]
I would recommend getting either ITR retainers or some titanium. The portflows run about $160 for a set.
Thanks, J
Thread
Thread Starter
Forum
Replies
Last Post
walrus_07
Acura Integra
6
02-02-2011 05:08 PM
