To those seeking to do H23VTEC or H23VTEC into a EK/96-00 civic....LOOK
#1
Thread Starter
Join Date: Jun 2002
Location: So Cal, CA, USA
Posts: 925
Likes: 0
Received 0 Likes
on
0 Posts
To those seeking to do H23VTEC or H23VTEC into a EK/96-00 civic....LOOK
To anyone looking to do a H23-VTEC into a EK Civic swap, I have the setup for you... (not sure if this should go here in the prelude section, hybrid, or classifieds, so mods just let me know...) Anyhow, I have the following setup ready for anyone who's been wanting to do this powerful swap.
If you look in Importreview.com, you will see that this swap with a H23 2.3L bottom end, mated to a H22A vtec head, completely BONE STOCK, with the exception of Type S pistons... (stock header, stock intake, stock exhaust, stock cam gears, stock fuel system...), yielded an impressive 186WHP. Now imagine doing the same, but with upgraded bolt ons, cams, and hondata, and you'll be over 200whp easy.
Anyhow, I have the following setup for sale:
- 1994 USDM H23A 2.3L complete motor including tranny (low mileage from my personal 94 Prelude SI, motor pulled at ~50k original miles. Excellent condition.
- 1995 USDM H22A 2.2 VTEC Cylinder Head (complete valvetrain, cams, gears, etc)
- H22A 2.2 VTEC Intake Manifold, sensors, throttle body, etc.
- HCP EK22 Motor Mount kit -H22/H23 into 96-00 Civic - (brand new)
- Proper Axle Setup for Hybrid swap:
90-93 Integra Axles
90-93 Accord Intermediate Shaft
Taking best reasonable offer at this time. Prefer local (Southern California) Pickup, but will ship at buyer's expense, (I also have access to cheap shipping rates via a trucking company).
Please PM me or email me at h35nguye@ucsd.edu if you are interested. Thanks
If you look in Importreview.com, you will see that this swap with a H23 2.3L bottom end, mated to a H22A vtec head, completely BONE STOCK, with the exception of Type S pistons... (stock header, stock intake, stock exhaust, stock cam gears, stock fuel system...), yielded an impressive 186WHP. Now imagine doing the same, but with upgraded bolt ons, cams, and hondata, and you'll be over 200whp easy.
Anyhow, I have the following setup for sale:
- 1994 USDM H23A 2.3L complete motor including tranny (low mileage from my personal 94 Prelude SI, motor pulled at ~50k original miles. Excellent condition.
- 1995 USDM H22A 2.2 VTEC Cylinder Head (complete valvetrain, cams, gears, etc)
- H22A 2.2 VTEC Intake Manifold, sensors, throttle body, etc.
- HCP EK22 Motor Mount kit -H22/H23 into 96-00 Civic - (brand new)
- Proper Axle Setup for Hybrid swap:
90-93 Integra Axles
90-93 Accord Intermediate Shaft
Taking best reasonable offer at this time. Prefer local (Southern California) Pickup, but will ship at buyer's expense, (I also have access to cheap shipping rates via a trucking company).
Please PM me or email me at h35nguye@ucsd.edu if you are interested. Thanks
#2
Honda-Tech Member
Join Date: May 2002
Location: So. cal, ca
Posts: 2,894
Likes: 0
Received 0 Likes
on
0 Posts
Re: To those seeking to do H23VTEC or H23VTEC into a EK/96-00 civic....LOOK (Wiked935EK)
that motor youre refering to is my friend jason's motor from about 2 years ago, last i heard he blew a head gasket or something..
Thread
Thread Starter
Forum
Replies
Last Post
CivicSiR7
Honda Civic / Del Sol (1992 - 2000)
9
02-07-2002 06:41 PM