swap question
#1
Member
Thread Starter
Join Date: Dec 2002
Location: Come to the, DarkSide
Posts: 1,901
Likes: 0
Received 0 Likes
on
0 Posts
swap question
when doing a swap and just working on the car (Civic Si) whats the most common sockets do i need? I was doing a little invoice on my stuff and im missing alot of stuff. im think 13mm and anything else?
#2
Senior Member
Re: swap question (Soon_2b_evil)
https://honda-tech.com/zerothread?id=131949
Also, 13mm isn't normally used on a Honda (not a factory size).
The most common used ones are 10mm, 12mm, 14mm and 17mm.
There is also 32mm for the axle nut.
HTH.
Also, 13mm isn't normally used on a Honda (not a factory size).
The most common used ones are 10mm, 12mm, 14mm and 17mm.
There is also 32mm for the axle nut.
HTH.
Thread
Thread Starter
Forum
Replies
Last Post