suja 1 motoring's k20a midori ek hatch
09-21-2005, 04:47 PM
#54
Honda-Tech Member
Thread Starter
Re: (neonorific20)
yeah... it sucks when you gotta pay huh? i'm just glad i'm sticking with honda's. when i was going 2jz, just a 6 speed swap was about $6k! so i'm not really complaining.
09-23-2005, 07:54 AM
#59
Honda-Tech Member
iTrader: (3)
Join Date: Mar 2003
Location: WI, United States
Posts: 1,808
Likes: 0
Received 0 Likes
on
0 Posts
Re: suja 1 motoring's k20a midori ek hatch (pb16b)
Saw this beast at route 66 for import dragwars. This thing is a monster. Clean looking one too. Props for still supporting 96-98 front end with type r lip. Same thing I have but a coupe and silver.
09-23-2005, 09:04 AM
#60
Honda-Tech Member
Thread Starter
Re: suja 1 motoring's k20a midori ek hatch (KENetics1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KENetics1 »</TD></TR><TR><TD CLASS="quote">Saw this beast at route 66 for import dragwars. This thing is a monster. Clean looking one too. Props for still supporting 96-98 front end with type r lip. Same thing I have but a coupe and silver.</TD></TR></TABLE>
did i talk to you? yeah, it ran good for its debut. i'm expecting more next time.
did i talk to you? yeah, it ran good for its debut. i'm expecting more next time.
09-23-2005, 03:34 PM
#61
Honda-Tech Member
iTrader: (3)
Join Date: Mar 2003
Location: WI, United States
Posts: 1,808
Likes: 0
Received 0 Likes
on
0 Posts
Re: suja 1 motoring's k20a midori ek hatch (pb16b)
Yeah I talked to you, I was asking you a bunch of questions. I think if you work on them launches you definately would've have ran better times. Those rims you had on in the back were nice too.
09-24-2005, 08:11 AM
#62
Honda-Tech Member
Thread Starter
Re: suja 1 motoring's k20a midori ek hatch (KENetics1)
yeah, i wish i could get more runs or even more practice. just too busy for test runs.
09-24-2005, 11:18 AM
#63
Honda-Tech Member
Join Date: Jan 2004
Location: Charlotte, NC, USA
Posts: 1,820
Likes: 0
Received 0 Likes
on
0 Posts
Re: (pb16b)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pb16b »</TD></TR><TR><TD CLASS="quote">yeah... it sucks when you gotta pay huh? i'm just glad i'm sticking with honda's. when i was going 2jz, just a 6 speed swap was about $6k! so i'm not really complaining.</TD></TR></TABLE>
6,000 for a 6speed swap? OK, no Supra for me. Man, that's crazy...I could have made my Neon run 12's for a shitload less than your swap cost (but obviously with a modded motor whereas you'd be doing it with a farely stock K20)
Ben
6,000 for a 6speed swap? OK, no Supra for me. Man, that's crazy...I could have made my Neon run 12's for a shitload less than your swap cost (but obviously with a modded motor whereas you'd be doing it with a farely stock K20)
Ben
09-30-2005, 05:26 PM
#64
Junior Member
Join Date: Aug 2005
Location: Nashua, NH USA
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Re: suja 1 motoring's k20a midori ek hatch (EK-Chris)
I'm planning dropping a K20 into a del sol. I was hoping you could point me in the right direction.
I have the mounts by hasport and the motor will be in my garage in 1month.
I'd like to know how much fabrication is involved in this setup. What is a CRV bracket. Do I need custom headers???
I'm getting this motor for fairly cheap, could you list the extras I might need for this K20 to pull my tini del sol!!
I have the mounts by hasport and the motor will be in my garage in 1month.
I'd like to know how much fabrication is involved in this setup. What is a CRV bracket. Do I need custom headers???
I'm getting this motor for fairly cheap, could you list the extras I might need for this K20 to pull my tini del sol!!
09-30-2005, 06:15 PM
#65
Honda-Tech Member
iTrader: (3)
Join Date: Mar 2003
Location: WI, United States
Posts: 1,808
Likes: 0
Received 0 Likes
on
0 Posts
Re: suja 1 motoring's k20a midori ek hatch (Elwuudz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Elwuudz »</TD></TR><TR><TD CLASS="quote"> I'm planning dropping a K20 into a del sol. I was hoping you could point me in the right direction.
I have the mounts by hasport and the motor will be in my garage in 1month.
I'd like to know how much fabrication is involved in this setup. What is a CRV bracket. Do I need custom headers???
I'm getting this motor for fairly cheap, could you list the extras I might need for this K20 to pull my tini del sol!!</TD></TR></TABLE>
http://www.hybrid-racing.com or http://www.k20a.org
I have the mounts by hasport and the motor will be in my garage in 1month.
I'd like to know how much fabrication is involved in this setup. What is a CRV bracket. Do I need custom headers???
I'm getting this motor for fairly cheap, could you list the extras I might need for this K20 to pull my tini del sol!!</TD></TR></TABLE>
http://www.hybrid-racing.com or http://www.k20a.org
10-01-2005, 05:52 AM
#66
Honda-Tech Member
Thread Starter
Re: suja 1 motoring's k20a midori ek hatch (KENetics1)
i'm assuming you got crv bracket from someone? where did you hear you needed it?
there's not much fabrication involved... other than brackets and exhaust, there's nothing i can really think of.
there's not much fabrication involved... other than brackets and exhaust, there's nothing i can really think of.
10-17-2005, 02:12 PM
#68
Honda-Tech Member
Thread Starter
Re: suja 1 motoring's k20a midori ek hatch (pb16b)
nothing to really brag about... but i joined the 12 second all motor club yesterday! woohoo!
10-18-2005, 02:19 PM
#70
Junior Member
Join Date: Feb 2004
Location: wa
Posts: 624
Likes: 0
Received 0 Likes
on
0 Posts
Re: suja 1 motoring's k20a midori ek hatch (THE GAME IS THICK)
i just saw this thread. you are the man indeed! pimp car..can u post some pics of your car like a full body shot 
