stupid ? but don't know
#1
Thread Starter
Join Date: Nov 2002
Location: edmond, ok, us
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
stupid ? but don't know
yeah i know i'm, i'm a noob
my ?? is one of my friends has 93 cx civic hatch, and he had '00 b16a2 swap istalled about 2 weeks ago, and now his cv joints are going out, you know making that "clackking" noise, typical of worn out cv's. He has a set of 96 teg gsr axles with the cv joints and they appear to still be good, he wants me to help him put them in, but can i use the entire gsr axles and gsr cv joints in his car with this setup, will they fit?? i know this is probably a stupid ?? i just haven't had alot of exp. with m/swaps, mostly just helping my friends and watching. can i use the gsr cv joints with his 93 cx axles, and if not i have a set of axles with the cv joints, from a 97 civic ex, would these be easier to swap in, or what?? any info. would be great.
#3
Senior Member
Re: stupid ? but don't know (deez92)
the gsr axles will fit just fine, as for the civic SOHC motor ones, they will not work due to no intermediate shaft.
the EX and the CX axles have one short axle and one long one.
GSR's will work just fine, however.
the EX and the CX axles have one short axle and one long one.
GSR's will work just fine, however.
Thread
Thread Starter
Forum
Replies
Last Post
helpmeplease
Hybrid / Engine Swaps
5
08-30-2005 11:33 AM