Sorry for a repost....B16A Axle problem
#1
Honda-Tech Member
Thread Starter
Join Date: May 2005
Location: Halifax, NS, Canada
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for a repost....B16A Axle problem
I know, I know I've been through this before I just lost the post and now I'm actually going to replace my axles.
This isn't my first swap so spare me the intro bable stupid questions.
I swapped a JDM B16A in my 98 Civic and I don't know what axles I put in.
They're pooped and I need to replace them.
The axles I have in it differ from the ones I was using in my last swap which was in the car, an LS Vtec.
The axles that are in there now look identical except that on one the splines only start half way up the nub and on the other the splines go the whole way. both Axles ends are male to male, what axles do I need to replace them with they are toasted.
This isn't my first swap so spare me the intro bable stupid questions.
I swapped a JDM B16A in my 98 Civic and I don't know what axles I put in.
They're pooped and I need to replace them.
The axles I have in it differ from the ones I was using in my last swap which was in the car, an LS Vtec.
The axles that are in there now look identical except that on one the splines only start half way up the nub and on the other the splines go the whole way. both Axles ends are male to male, what axles do I need to replace them with they are toasted.
Thread
Thread Starter
Forum
Replies
Last Post
VDM_DC2
Suspension & Brakes
11
10-28-2009 12:28 PM