TwoSaints

Hey, whats up... first of all this is not a rant on Raxle Axles, they are great IMO and marty is awsome.

heres the problem, I have a set of raxle axles on my car (just got it done today) and the passenger side is fine, but the issue is with the drivers side.

I have the 90-93 integra intermediate shaft and using the same style axle. The car is lowered, with that said when I go over a dip in the road I feel this intense rattle that can be felt through out the car. I put the car on the lift and saw that the shaft that goes into the CV joint looks pretty "squished" (for lack of a better word), and thats with the car on a lift that picks the car up by the chasis, so the wheels are free and as low as they can go.

This is the thing, when I was using my old axles, which went bad, with the car at the same height as it is now, it didn't do this.

I have a a first gen b16a including the cable tranny with the hasport kit in my 95 civic coupe. Now, the easy fix would be to raise the car, but is this really necessary if I used the other axles with no problem? Or is there something wrong with my axle setup? Thanx for any responces guys.

-Rob

TwoSaints

Bumping it up, theres gotta be someone in this forum who can help me out... I also searched, but that damn thing didn't come up with much