I have a p72-2 head and the bottom half I got is out of an 04 crv! I'm building the engine and was wondering what head gasket to use! Also the engine when done is going in a 95 del sol, will the trans mock up right to the engine or will I need a new trans?

 

there's no way you have a k series bottom end and a gsr head.

 

I think OP must be mistaken about the year of his block. It's more than likely a B20. We would need more information on your build sir.

 

If your planning to do a B20 vtec build with a stock bore you will want to use the B20 head gasket.

 

It's a b20z bottom out of a crv and a p72-2 head, need the gasket

 

Yea your block isn't out of an 04 crv. I'd get the b20vtec head gasket from golden eagle

As for the trans, what engine/trans is in the car right now? B or D series?

 

It's a d series that's in the car now

 

you need a B-series transmission and go with the HG from GE.