Is this possible?
#1
Member
Thread Starter
Join Date: Dec 2000
Location: Islip, CA, USA
Posts: 4,848
Likes: 0
Received 0 Likes
on
0 Posts
Is this possible?
Buy an LS block. Take out sleeves. Put in OEM sleeves from a b20. Couple of shops can do it for around 200-300$ for new sleeves from what I've seen. Im not talking amazing golden eagle or darton ones.. just oem quality.
This would enable one to get an ls block (Cheap) and have b20 bore for like 400 or 500$... much less than the going rate for a b20 shortblock / longblock - head (if you can sell it)
This would enable one to get an ls block (Cheap) and have b20 bore for like 400 or 500$... much less than the going rate for a b20 shortblock / longblock - head (if you can sell it)
#2
Member
Thread Starter
Join Date: Dec 2000
Location: Islip, CA, USA
Posts: 4,848
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is this possible? (Philly_01_ITR_Driver)
Oh wait... thats right, ITR owners don't go b20, their botom ends are "TYPE R" and they don't need more power... jeez i forgot.
*******.
*******.
Thread
Thread Starter
Forum
Replies
Last Post
andrearcher2003
Drag Racing
10
09-27-2011 04:15 PM
spooncivic1
All Motor / Naturally Aspirated
9
08-29-2006 05:45 PM
SpeedMonkeyRacing
Forced Induction
15
10-01-2003 12:57 PM