ODB2 to ODB1 distributor converting problem
#1
Member
Thread Starter
Join Date: Jul 2002
Location: In The Valley Oregon
Posts: 3,028
Likes: 0
Received 0 Likes
on
0 Posts
ODB2 to ODB1 distributor converting problem
ok, ive done it before on a y8 dist to convert it to odb1. but now i tried it on a odb2 LS distributor using an odb1 civic plug, and ran into a funny problem. the odb1 plug has an extra wire where the LS dist doesnt (see pics below)
pic of ODB2 LS dist plug
pic of extra wire on odb1 plug
another pic of the location of the extra wire
so this wire is missing on the ODB2 LS plug. wtf is it used for on the ODB1 plug. all the others match up perfect and they are all used in teh LS dist. wtf is this extra on the odb1 plug?
pic of ODB2 LS dist plug
pic of extra wire on odb1 plug
another pic of the location of the extra wire
so this wire is missing on the ODB2 LS plug. wtf is it used for on the ODB1 plug. all the others match up perfect and they are all used in teh LS dist. wtf is this extra on the odb1 plug?
#3
Re: ODB2 to ODB1 distributor converting problem (turbogixxer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbogixxer »</TD></TR><TR><TD CLASS="quote">That wire shows like it is not a stock wire. But, green is igniter.</TD></TR></TABLE> yeah, it does look like it was added...
umm.. maybe the green wire went to an external coil? are those usdm/ jdm?
umm.. maybe the green wire went to an external coil? are those usdm/ jdm?
#4
Honda-Tech Member
Re: ODB2 to ODB1 distributor converting problem (hondaZvic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondaZvic »</TD></TR><TR><TD CLASS="quote">maybe the green wire went to an external coil?</TD></TR></TABLE>
That is a civic harness, unless someone added it, it was never there from Honda
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondaZvic »</TD></TR><TR><TD CLASS="quote">are those usdm/ jdm?</TD></TR></TABLE>
JDM wire colors = USDM wire colors
That is a civic harness, unless someone added it, it was never there from Honda
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondaZvic »</TD></TR><TR><TD CLASS="quote">are those usdm/ jdm?</TD></TR></TABLE>
JDM wire colors = USDM wire colors
#5
Re: ODB2 to ODB1 distributor converting problem (turbogixxer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbogixxer »</TD></TR><TR><TD CLASS="quote">
JDM wire colors = USDM wire colors</TD></TR></TABLE>
sorry, i meant the obd2 ls distributor, is that jdm or usdm? or are they still the same?
JDM wire colors = USDM wire colors</TD></TR></TABLE>
sorry, i meant the obd2 ls distributor, is that jdm or usdm? or are they still the same?
#6
Re: ODB2 to ODB1 distributor converting problem (hondaZvic)
wait a second.... <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Simple »</TD></TR><TR><TD CLASS="quote">pic of extra wire on odb1 plug
</TD></TR></TABLE>
here it looks as though, all the wires coming out of the dizzy have been hooked up to something...?.. am i right?
if so.. just yank that green wire out. its pointless.
</TD></TR></TABLE>
here it looks as though, all the wires coming out of the dizzy have been hooked up to something...?.. am i right?
if so.. just yank that green wire out. its pointless.
Trending Topics
#8
Honda-Tech Member
Re: ODB2 to ODB1 distributor converting problem (hondaZvic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondaZvic »</TD></TR><TR><TD CLASS="quote">wait a second....
here it looks as though, all the wires coming out of the dizzy have been hooked up to something...?.. am i right?
if so.. just yank that green wire out. its pointless.</TD></TR></TABLE>
Ha, now that I think about it, You are right, that spot is blank.
good job, Zang (i really hope I spelled your name right, I asked a few people how to spell it and this is the best I got)
here it looks as though, all the wires coming out of the dizzy have been hooked up to something...?.. am i right?
if so.. just yank that green wire out. its pointless.</TD></TR></TABLE>
Ha, now that I think about it, You are right, that spot is blank.
good job, Zang (i really hope I spelled your name right, I asked a few people how to spell it and this is the best I got)
#10
Honda-Tech Member
Re: ODB2 to ODB1 distributor converting problem (hondaZvic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondaZvic »</TD></TR><TR><TD CLASS="quote">zanE
to me
LOL</TD></TR></TABLE>
****, blame adam
to me
LOL</TD></TR></TABLE>
****, blame adam
Thread
Thread Starter
Forum
Replies
Last Post