NEED HELP ! JDM PROBLEM !
03-02-2005, 02:21 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2004
Location: Pittsburgh, PA, US
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
NEED HELP ! JDM PROBLEM !
I have a JDM ITR 5 lug conversion on my ek civic. I took my car to a little shop to get my wheel bearings fixed.
PROBLEM : My driver side axle is stuck in the spindle. They tried heating and using a 2,500lb press to get it out. WILL NOT COME OUT. I need to find a way to fix this problem. Will a prelude spindle and outer joint fit on a JDM ITR axle? OR Does a USD ITR use the same size spindle and such.Is there a place where I can find a whole left side axle w/spindle and joints? PLEASE HELP
Also, Is their any difference between JDM and USD in axle assemblies?
Modified by roadracewade at 9:58 PM 3/2/2005
PROBLEM : My driver side axle is stuck in the spindle. They tried heating and using a 2,500lb press to get it out. WILL NOT COME OUT. I need to find a way to fix this problem. Will a prelude spindle and outer joint fit on a JDM ITR axle? OR Does a USD ITR use the same size spindle and such.Is there a place where I can find a whole left side axle w/spindle and joints? PLEASE HELP
Also, Is their any difference between JDM and USD in axle assemblies?Modified by roadracewade at 9:58 PM 3/2/2005
Thread
Thread Starter
Forum
Replies
Last Post