My Mojo.
11-10-2004, 03:45 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2001
Location: vienna, va, us
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
My Mojo.
Please help me with my planning. I have heard conflicting things about what else I need to make my parts work. I am try'n to find a 92-95 shell.
Parts I have:
USDM Gsr with 63K miles (Hydrolocked)
GSR head with stock cams
P30 pistons
USDM & JDM intake mani. with all sensors and TB's
Engine Wire harness off of the JDM Motor
Skunk2 stage 3 cam <----- Free
Stock B18c injectors/fuel rail
Parts I need:
Rods
Bearings
Trans
Axles
ECU
Mounts
Please help me with my swap. Info needed is, OBD2b 99 GSR engine and harness into a 92-95 civic with a p28, Is Uberdata good for this or should I go with Hondata? Is the JDM vs. USDM intake mani. different. Should I expect any problems with these parts.
Thanks
T-O-Double-D
Parts I have:
USDM Gsr with 63K miles (Hydrolocked)
GSR head with stock cams
P30 pistons
USDM & JDM intake mani. with all sensors and TB's
Engine Wire harness off of the JDM Motor
Skunk2 stage 3 cam <----- Free
Stock B18c injectors/fuel rail
Parts I need:
Rods
Bearings
Trans
Axles
ECU
Mounts
Please help me with my swap. Info needed is, OBD2b 99 GSR engine and harness into a 92-95 civic with a p28, Is Uberdata good for this or should I go with Hondata? Is the JDM vs. USDM intake mani. different. Should I expect any problems with these parts.
Thanks
T-O-Double-D
Thread
Thread Starter
Forum
Replies
Last Post
VTECcnIT
Acura Integra
3
02-13-2006 12:13 PM