So I had my radiator crack on me which caused massive amounts of overheating on the head(Everytime it would spew all the anti-freeze onto the block I'd immediately turn off the engine and coast to the side) And now after replacing it I have white smoke in the exaust. There wasnt white smoke before and it's not cold enough for it to be due to temps so I'm thinking either A) the head is warped which blew the gasket as well, or b) there's a crack in the head. So if it's just warped head and a bad head gasket I can get the head milled and magnafluxed for $20 but if it is cracked I'm thinking about putting a d16z6 head on my d15 block. My question is, what do I need to get to put the d16 head on my non-vtech block?