LS/VTEC
#1
LS/VTEC
What do you think?
B18B Block
Hot tanked
Decked block/ 1.9L Bored
Endyn 12:1 Pistons
Endyn/Eagle Rods
All new bearings/seals/gaskets
Unorthodox racing pulley
P30 Oil and Water Pumps
B17A Head
2001 ITR Intake/Exhaust Cams
Portflow Titanium Retainers
ITR Inner valve springs
ITR Intake valves
Toda Cam Gears
Ported Throttle Body
Polished stock intake manifold/exhaust ports
ARP Head studs
Misc.
RC 270 cc injectors
B & M FPR/ gauge
Bosch in-tank fuel pump
Fields VTEC controller
NGK Plugs/Wires
MSD Cap/6A/Blaster3
Cooling/Tranny
Griffin Radiator
Spoon Thermostat/Radiator Cap
Y1/LSD Tranny
Centerforce Dual Friction clutch
Intake/Exhaust
AEM CAI
JDM ITR 4-1 Header, heatwrapped
Godspeed testpipe
Open exhaust
BTW this will be in a CRX (fully stripped)
B18B Block
Hot tanked
Decked block/ 1.9L Bored
Endyn 12:1 Pistons
Endyn/Eagle Rods
All new bearings/seals/gaskets
Unorthodox racing pulley
P30 Oil and Water Pumps
B17A Head
2001 ITR Intake/Exhaust Cams
Portflow Titanium Retainers
ITR Inner valve springs
ITR Intake valves
Toda Cam Gears
Ported Throttle Body
Polished stock intake manifold/exhaust ports
ARP Head studs
Misc.
RC 270 cc injectors
B & M FPR/ gauge
Bosch in-tank fuel pump
Fields VTEC controller
NGK Plugs/Wires
MSD Cap/6A/Blaster3
Cooling/Tranny
Griffin Radiator
Spoon Thermostat/Radiator Cap
Y1/LSD Tranny
Centerforce Dual Friction clutch
Intake/Exhaust
AEM CAI
JDM ITR 4-1 Header, heatwrapped
Godspeed testpipe
Open exhaust
BTW this will be in a CRX (fully stripped)
#2
Honda-Tech Member
Join Date: Aug 2001
Location: WI
Posts: 2,242
Likes: 0
Received 0 Likes
on
0 Posts
Re: LS/VTEC (tampaSi)
that thing will be beastly if properly put together if you are just looking for idea try doing a search on this topic a few members and I have gone through a few ls vtec discussions. there will be alot of post on this so try that.
Thread
Thread Starter
Forum
Replies
Last Post
LsVtecS2
Honda Civic / Del Sol (1992 - 2000)
10
08-26-2008 11:30 AM
wdyno
Acura Integra
11
10-16-2001 08:44 AM