LS/CRVTEC 411!!!!!
Thread Starter
Honda-Tech Member
Joined: Apr 2001
Posts: 36
Likes: 0
From: Daly City, CA, USA
LS/CRVTEC 411!!!!!
I found this ad on purehonda.com and I just had to let everyone know what this guys had to say about LS/CRVTECs and how much of a bad idea it is......Can anyone prove him wrong?...Anyone here have good experiences or have or know someone running one strong?....Voice all your opinions on LS/CRVTEC setups and places that know how to build them right!!....I want to go CRVTEC but what do ya'll think....Go for it?....or 4get about it?...
Heres the link: http://www.hondastyle.com/articles/display.php?category
pinions&article=ls-vtec.inc
TRY IT NOW!!
[Modified by Rizz, 5:03 PM 11/2/2001]
[Modified by Rizz, 5:05 PM 11/2/2001]
Heres the link: http://www.hondastyle.com/articles/display.php?category
pinions&article=ls-vtec.inc TRY IT NOW!!
[Modified by Rizz, 5:03 PM 11/2/2001]
[Modified by Rizz, 5:05 PM 11/2/2001]
Honda-Tech Member
Joined: Jul 2001
Posts: 3,611
Likes: 3
From: Boston, MA, USA
Re: LS/CRVTEC 411!!!!! (mobrep)
Well, do you already have a B18c? If so, just sleeve it to 84mm, use Endyn Rollerwave pistons, and it'll be almost 2.0l. Plus, it has the oil squirters and main cap girdle stock, so not as many reliability issues either.
Thread Starter
Honda-Tech Member
Joined: Apr 2001
Posts: 36
Likes: 0
From: Daly City, CA, USA
HERE TRY IT NOW!!!!!
http://www.hondastyle.com/articles/display.php?categorypinions&article=ls-vtec.inc
[Modified by Rizz, 5:04 PM 11/2/2001]
pinions&article=ls-vtec.inc [Modified by Rizz, 5:04 PM 11/2/2001]
Joined: Oct 2001
Posts: 50
Likes: 0
From: marion, nc, usa
Re: LS/CRVTEC 411!!!!! (Rizz)
crvtec is a very reliable engine to run street or strip.we have done several of these in street trim with 240-260 chp.our shop car with a mild crvtec engine built
with endyn pistons,rods,and endyn head work is 258 chp.have done a couple of
shakedown passes this week on this setup:7.45 @ 94 mph 1/8th and 11.93 @ 114 mph.this is with conservitive engine tuning.IMHO there is no replacement for dis-
placement !!! good luck with your engine.
larry
with endyn pistons,rods,and endyn head work is 258 chp.have done a couple of
shakedown passes this week on this setup:7.45 @ 94 mph 1/8th and 11.93 @ 114 mph.this is with conservitive engine tuning.IMHO there is no replacement for dis-
placement !!! good luck with your engine.
larry
Junior Member
Joined: Oct 2001
Posts: 345
Likes: 1
Re: LS/CRVTEC 411!!!!! (bfast)
hey bfast
I was just on your site and saw you had a 99 GSR swap. I was wondering what your price was.My friend at CPCC, Kelly Hoffman( used to work at car country) Told me you were the man when it comes to swaps. Please let me know
civic97dx@hotmail.com
thanks
I was just on your site and saw you had a 99 GSR swap. I was wondering what your price was.My friend at CPCC, Kelly Hoffman( used to work at car country) Told me you were the man when it comes to swaps. Please let me know
civic97dx@hotmail.com
thanks
Junior Member
Joined: Jan 2001
Posts: 115
Likes: 0
Re: LS/CRVTEC 411!!!!! (civic97dx)
civic97dx,
I am sure glad you decided to post again. How about asking Larry who built that motor for him. You will be suprised to know that it is the same person you condemned in your first post.
side note, I am in no way affiliated with that company
I am sure glad you decided to post again. How about asking Larry who built that motor for him. You will be suprised to know that it is the same person you condemned in your first post.
side note, I am in no way affiliated with that company
Trending Topics
Junior Member
Joined: Oct 2001
Posts: 345
Likes: 1
Re: LS/CRVTEC 411!!!!! (FUCATYPR)
I really didn't mean any harm by what I said , just I have friends who really got screwed over by you know who and He didn't even try to help them out afetrwards. I'm the type of person who really has to trust someone if I'm going to pay them that much to bulid me a motor. But I really didn't mean to step on any toes by what I said. sorry
Oh by the way
What's up kareem!
Guess who?
[Modified by civic97dx, 2:32 AM 11/6/2001]
Oh by the way
What's up kareem!
Guess who?
[Modified by civic97dx, 2:32 AM 11/6/2001]
Junior Member
Joined: Jan 2001
Posts: 115
Likes: 0
Re: LS/CRVTEC 411!!!!! (civic97dx)
Would these be the same "friends" that blew the motor up just driving down the road, less than a week after it was built? But 10 different people saw him at the track doing a smokey burnout in the waterbox. Just my opinion, but some people try to cover their own stupidty by blaming others for their own mistakes.
You can rest assured that if Jamie builds your motor, and you use some common sense, that motor will last you a long time.
punch
You can rest assured that if Jamie builds your motor, and you use some common sense, that motor will last you a long time.
punch
Honda-Tech Member
Joined: May 2001
Posts: 3,073
Likes: 0
From: NC
Re: LS/CRVTEC 411!!!!! (civic97dx)
I really didn't mean any harm by what I said , just I have friends who really got screwed over by you know who and He didn't even try to help them out afetrwards. I'm the type of person who really has to trust someone if I'm going to pay them that much to bulid me a motor. But I really didn't mean to step on any toes by what I said. sorry
Oh by the way
What's up kareem!
Guess who?
what's up
When is the motor coming?
Come on, hurry up, it's time to make the DX nasty!
To tell you the truth we have had some customer that have turned into problems. That's why we are turning some customers away.
[Modified by civic97dx, 2:32 AM 11/6/2001]
Oh by the way
What's up kareem!
Guess who?
what's up
When is the motor coming?
Come on, hurry up, it's time to make the DX nasty!
To tell you the truth we have had some customer that have turned into problems. That's why we are turning some customers away.
[Modified by civic97dx, 2:32 AM 11/6/2001]
When is the motor coming?
Come on, hurry up, it's time to make the DX nasty!
To tell you the truth we have had some customer that have turned into problems. That's why we are turning some customers away.
Call me when you read this.
Thread
Thread Starter
Forum
Replies
Last Post
