just thinking of stuff...H22 EG
#1
Honda-Tech Member
Thread Starter
just thinking of stuff...H22 EG
i was thinking of a H22 EG setup, but i HATE how close the IM gets to the firewall, are theer shorter IMs on the market that would fit the motor in less snugly?
#3
Honda-Tech Member
Thread Starter
Re: (2point2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2point2 »</TD></TR><TR><TD CLASS="quote">what bothers you about this? It's not going to hit. Or do you actualy hate how it 'looks'... </TD></TR></TABLE>
i duno, looks like it would hit the propvalve...but the further back it tilts is the better the axle geometry is ontop of that so i duno
i duno, looks like it would hit the propvalve...but the further back it tilts is the better the axle geometry is ontop of that so i duno
#4
Honda-Tech Member
Join Date: Dec 2001
Location: St Pete, Fl
Posts: 2,732
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Sleepy_Red_hatch)
Who told you that load of crap? tilting makes the axle angle worst. You need to move the motor back around 2 inches to get it completely straight, but if you dont like the look now then this swap isnt for you. I heard B16s look pretty.
#5
Honda-Tech Member
Join Date: Nov 2003
Location: Kitchener, Ontario, CANADA
Posts: 5,986
Likes: 0
Received 2 Likes
on
2 Posts
Re: (Sleepy_Red_hatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sleepy_Red_hatch »</TD></TR><TR><TD CLASS="quote">
i duno, looks like it would hit the propvalve...but the further back it tilts is the better the axle geometry is ontop of that so i duno</TD></TR></TABLE>
if you go with hasport mounts that you have nothing to worry about. if people were smacking their prop valves you'd never hear the end of it on HT.
i duno, looks like it would hit the propvalve...but the further back it tilts is the better the axle geometry is ontop of that so i duno</TD></TR></TABLE>
if you go with hasport mounts that you have nothing to worry about. if people were smacking their prop valves you'd never hear the end of it on HT.
Thread
Thread Starter
Forum
Replies
Last Post