How to mimic a CEL? H22 EG
05-09-2009, 04:36 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: London, UK, UK
Posts: 1,616
Likes: 0
Received 0 Likes
on
0 Posts
How to mimic a CEL? H22 EG
Ive just put a H22 into my EG civic and am not getting any CEL's come up. Ive tried disconnecting the TPS, the MAP and the Distributor but cant get a CEL to come up. Have I maybe missed something when mating the to wiring looms together?
Cheers
Cheers
05-12-2009, 08:38 AM
#3
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: London, UK, UK
Posts: 1,616
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to mimic a CEL? H22 EG
Haha maybe but I doubt it. The orange/yellow engine light does appear when I turn the ignition on then dissapears like on any other honda after a couple of seconds. I just cant believe that I have the wiring completely fault free.
Heres the service connector (bear in mind my car is UK so its passenger side)
Could it be something to do with the modified wiring loom the fact im not getting any CEL's? or does it take a while for them to appear. I havent even ran the engine through a complete warm up and cool down cycle (where the fan comes on yet)
Heres the service connector (bear in mind my car is UK so its passenger side)
Could it be something to do with the modified wiring loom the fact im not getting any CEL's? or does it take a while for them to appear. I havent even ran the engine through a complete warm up and cool down cycle (where the fan comes on yet)
Thread
Thread Starter
Forum
Replies
Last Post
juicy.koreans.suck
Honda Civic / Del Sol (1992 - 2000)
11
02-27-2003 05:34 PM
