h22 h23 swap is frustrating
#1
Junior Member
Thread Starter
Join Date: Apr 2006
Location: Sherman, TX, usa
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
h22 h23 swap is frustrating
i've done the swap and it works good (92 prelude si) untill i swap the p14 for the p13 then it runs like crap, and the tach dosn't work if that means anything. can anyone help me with this or know where i can find info on this problem?
Modified by KleenL at 1:59 PM 11/22/2007
Modified by KleenL at 2:00 PM 11/22/2007
Modified by KleenL at 1:59 PM 11/22/2007
Modified by KleenL at 2:00 PM 11/22/2007
#3
Junior Member
Thread Starter
Join Date: Apr 2006
Location: Sherman, TX, usa
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Re: h22 h23 swap is frustrating (boostedh22lude1)
thanks man i've been trying to figure that one out for weeks. after i checked your reply this morning i took the top off of the p13 and sure enough there was a burnt diode. also there was a spoon chip in there does anyone think this may have caused the problem. i would like to keep the chip but not if there is a chance that it would burn up the next p13.
P13 FOR SALE ANYONE???
P13 FOR SALE ANYONE???
#4
Junior Member
Thread Starter
Join Date: Apr 2006
Location: Sherman, TX, usa
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post