H22 Dyno plots
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Aug 2000
Location: San Jose, CA, USA
Posts: 1,619
Likes: 0
Received 0 Likes
on
0 Posts
H22 Dyno plots
Finally dyno'd the H22 coupe last week. Here's a pic of the car for those who don't know:
Car has a stock JDM H22, stock JDM exhaust & cat, and an RS*R catback exhaust. WE used the JDM Spoon P13 program, but found it to only make 2-3 HP over the stock JDM P13 program. This chart compares the stock Integra Type R intake and airbox againt the AEM CAI for the Type R on the H22. As you can see it makes a healthy difference:
BTW, we have a bunch of Prelude Type S parts on clearance here (someone buy them!):
http://www.hybridautomotive.com/clearance/
Thanks for looking.
:-)
Jeff
Car has a stock JDM H22, stock JDM exhaust & cat, and an RS*R catback exhaust. WE used the JDM Spoon P13 program, but found it to only make 2-3 HP over the stock JDM P13 program. This chart compares the stock Integra Type R intake and airbox againt the AEM CAI for the Type R on the H22. As you can see it makes a healthy difference:
BTW, we have a bunch of Prelude Type S parts on clearance here (someone buy them!):
http://www.hybridautomotive.com/clearance/
Thanks for looking.
:-)
Jeff
Trending Topics
#8
Re: H22 Dyno plots (h22dx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by h22dx »</TD></TR><TR><TD CLASS="quote">do u have to do the 5 lug convo for that?
</TD></TR></TABLE>
how else would you get 5 lug wheels to fit?
</TD></TR></TABLE>
how else would you get 5 lug wheels to fit?
#9
Honda-Tech Member
Join Date: Apr 2003
Location: CDA, ID
Posts: 8,312
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 Dyno plots (h22 ef)
good #'s, i cant wait to get my h22a project done, i wish i wouldn't of sold my h22a CX
but ill be on somewhat of a budjet so i wont be doing a AEM ITR intake i make mine from 3" pipe from JC whitney, but ill be doing the AN-R header, 2.5" exhaust, clutch/fly, and direct port
but ill be on somewhat of a budjet so i wont be doing a AEM ITR intake i make mine from 3" pipe from JC whitney, but ill be doing the AN-R header, 2.5" exhaust, clutch/fly, and direct port
Thread
Thread Starter
Forum
Replies
Last Post