nitrousballa45

I will be starting my build soon and I have most if not all of it.The build will be going in a 98 ek hatch "picking up this week end".I will be doing a j
32a2 with j37"07 mdx" crank shaft and custom rods from a v8 build that some one was parting out"if the numbers are right the parts will work lol"

I have a chance to pick up a gt500 super charger but I need to verify it spins in the same direction as the motor.I will also be stuffing full 04/06 tl suspension under the ek hatch so stay tuned with pics.I have pics on my phone but do not know how to dl them to computer or lap top should I say.




Any thoughts on what I'm going to attempt to do if the super charger spins the right way which I'm going to check on now.I have been here for a very very long time under another name nitrousballa but for got pass word lol.

TracerAcer2.2L

My main concern is why/how you are going to install tl suspension on an "ek", it seems pointless unless you want to do a bunch of custom fab work just to get rid of the upper A-arms? lol why

Supercharger would be cool but I hope you're aware that you need a custom intake manifold and brackets to mount the thing so I hope you have access to a foundry or something

nitrousballa45

The tl suspension is just to be different and yes I'm aware of the custom manifold that will have to be made.I've built plenty of motors and I particularly like the h series.I've been out of the scene for a very very long time.I do not know a lot about the j series so I've been researching before I just dive in.


that big of a charger should work very nicely with the stroker motor.

nitrousballa45

mods please delete....I will do the build but with just one pic when its done...thanks everyone