got CELs
Thread Starter
Honda-Tech Member
Joined: Mar 2002
Posts: 481
Likes: 0
From: Vabch, VA, USA
got CELs
IACV /CKFS/
IACV-the valve gets signal and im thinking that because I'm using the wrong throttle cable it sets my idle at 300 so its screwing with my IACV
CKFS-crank.fluc.sens I believe that i've connected it correct.
I have the DX harness and I'm running a B18b. I can get a signal sometimes and it'll clear but most of the time the light is on.
Any help on these 2 things would be appreciated thanks.
B18b in a 96DX. with the DX harness LS ECU and the DX throttle cable.
IACV-the valve gets signal and im thinking that because I'm using the wrong throttle cable it sets my idle at 300 so its screwing with my IACV
CKFS-crank.fluc.sens I believe that i've connected it correct.
I have the DX harness and I'm running a B18b. I can get a signal sometimes and it'll clear but most of the time the light is on.
Any help on these 2 things would be appreciated thanks.
B18b in a 96DX. with the DX harness LS ECU and the DX throttle cable.
Thread
Thread Starter
Forum
Replies
Last Post