EG B18c1 swap emmissions question
#1
Junior Member
Thread Starter
Join Date: Aug 2008
Location: Morgan Hill, Ca, USA
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
EG B18c1 swap emmissions question
I am trying to find a good spot to mount the evap purge control solenoid. I have it zip-tied to the intake manifold and i have been told that it won't pass the referee visual like that. Am I going to have to custom make a bracket to mount it to the firewall? Any advice would be greatly appreciated this is my first build and have already taken it to the ref once and failed because my ecu didn't have it's stickers.
#3
Junior Member
Thread Starter
Join Date: Aug 2008
Location: Morgan Hill, Ca, USA
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Re: EG B18c1 swap emmissions question
Is that the only place to put it. jdm manifold doesn't have threads on it. Can I have a machine shop put threads in the manifold? or do i have to buy a new manifold?
#6
Honda-Tech Member
Join Date: Mar 2004
Location: San Diego, CA, USA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Re: EG B18c1 swap emmissions question
I just made a 90 degree tab and bolted it to the firewall right behind the IM. I even reused an existing threaded hole.
Thread
Thread Starter
Forum
Replies
Last Post
EgSalad
Tech / Misc
5
06-17-2007 03:57 PM