crimping??
#1
New User
Thread Starter
Join Date: Aug 2001
Location: Seattle, WA, USA
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
crimping??
I am in the process of making a wiring conversion harness. I have new crimp pins and plugs. The only problem i am running across is that i dont know how to crimp the pins to the wire. The pins are shaped like |__| where the wire goes in and i dont believe that a standard crimping tool will do the job.... Anybody that can give me some ideas as what to use??
#3
New User
Thread Starter
Join Date: Aug 2001
Location: Seattle, WA, USA
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Re: crimping?? (smallttocs)
i think i'm going to do a combination of both.. just use some pliers to crimp and then a dab of solder to make sure it holds..
Thread
Thread Starter
Forum
Replies
Last Post
GeoffCB7
Honda Accord (1990 - 2002)
3
03-28-2013 11:47 AM
949
Welding / Fabrication
23
02-12-2010 12:17 PM