code 23 ?
#2
Re: code 23 ? (91 SlEePeR)
Code 23 = knock sensor. Check your sensor and the connection. Might need to re-run a shielded wire from the knock sensor to the ECU (into pin B19 on the PR3 ECU)
#3
Honda-Tech Member
Join Date: Dec 2001
Location: Gresham, Oregon, USA
Posts: 5,418
Likes: 0
Received 5 Likes
on
5 Posts
Re: code 23 ? (Newman)
Just to add a bit more... If you need to add this KS line or for some reason it got disconnected Newman is right... the nonOBD pinout is B19, but the OBD1 PR3 pinout is D3... Just incase you weren't talkin about the nonOBD PR3 to begin with... Good Luck!!
#4
Re: code 23 ? (Kataku2K3)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kataku2K3 »</TD></TR><TR><TD CLASS="quote">Just to add a bit more... the nonOBD pinout is B19, but the OBD1 PR3 pinout is D3... Just incase you weren't talkin about the nonOBD PR3 to begin with... Good Luck!!</TD></TR></TABLE>
Of course. But I saw his sig and it said "91 sleeper" so I figured he's got an EF, thus non-OBD PR3... heh
Of course. But I saw his sig and it said "91 sleeper" so I figured he's got an EF, thus non-OBD PR3... heh
Thread
Thread Starter
Forum
Replies
Last Post