A/C Belt and vacume line ?
12-10-2006, 11:27 AM
#1
New User
Thread Starter
Join Date: Aug 2001
Location: Gastonia, NC, US
Posts: 364
Likes: 0
Received 0 Likes
on
0 Posts
A/C Belt and vacume line ?
What A/C belt do I use for my EK installing a B16A2 using the DX compressor.
I don't know how to post a pic but here is an explanation of the vacume line issue:
The vacume line coming out of the drivers side of the intake above the 4th intake pluntum on the drivers side there is a broken off flush line. If this makes any sense than is it needed?
Also there is a check valve right in front of it attached to the valve cover and the
metal vacume line/port is kinked. Is this necessary?
I don't know how to post a pic but here is an explanation of the vacume line issue:
The vacume line coming out of the drivers side of the intake above the 4th intake pluntum on the drivers side there is a broken off flush line. If this makes any sense than is it needed?
Also there is a check valve right in front of it attached to the valve cover and the
metal vacume line/port is kinked. Is this necessary?
Thread
Thread Starter
Forum
Replies
Last Post
