b20 idle problem
#1
Thread Starter
Join Date: May 2004
Location: calhoun, ga, usa
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
b20 idle problem
Okay I put a b20 in my hatch i used a obd1 p75 ecu a obd2 gsr engine harness because the engine was obd2 plug and play.
Ok here is the problem it has a very rough idle it is low and once the motor warms up it will only idle for a min. So I tried to adjust the tps witha volt meter iam pretty sure i messed up the tps because know iam getting a cel for the tps. Thats proably part of the problem but it was doing it before the cel came on.
So what the hell do u guys think.
Ok here is the problem it has a very rough idle it is low and once the motor warms up it will only idle for a min. So I tried to adjust the tps witha volt meter iam pretty sure i messed up the tps because know iam getting a cel for the tps. Thats proably part of the problem but it was doing it before the cel came on.
So what the hell do u guys think.
Thread
Thread Starter
Forum
Replies
Last Post