B20 with B17A crank
#1
New User
Thread Starter
Join Date: Apr 2001
Location: Whistler 2010, BC, CANADA
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
B20 with B17A crank
I am building a B20VTEC for FI and am considering the B17A crank.
What is involved in dropping the B17A crank into a B20 to get the ideal r/s ratio? Is it as simple as getting custom rods?
I am thinking of using the Endyn B20 9.2:1 pistons.
Please point me in the right direction... Thanks.
What is involved in dropping the B17A crank into a B20 to get the ideal r/s ratio? Is it as simple as getting custom rods?
I am thinking of using the Endyn B20 9.2:1 pistons.
Please point me in the right direction... Thanks.
#2
Honda-Tech Member
Join Date: May 2001
Location: Midwest
Posts: 5,698
Likes: 0
Received 0 Likes
on
0 Posts
#3
New User
Thread Starter
Join Date: Apr 2001
Location: Whistler 2010, BC, CANADA
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Re: B20 with B17A crank (HXMan)
Thanks HXMan... I've already been through that page countless times
Still very confused about the clearance issues... Is it possible to use the B17A crank and a rod to give me 1.75 r/s without any mods to the block?
Still very confused about the clearance issues... Is it possible to use the B17A crank and a rod to give me 1.75 r/s without any mods to the block?
Thread
Thread Starter
Forum
Replies
Last Post