B18c5 into EK
#1
Member
Thread Starter
Join Date: Apr 2006
Location: Relocating, usa
Posts: 1,620
Likes: 0
Received 0 Likes
on
0 Posts
B18c5 into EK
Being my first swap i have been doing research for the last 4 or 5 months. I've searched on many sites including this one for info on putting a 98 b18c5 into a 99 honda civic ex. I know i need the following from a 99-00 SI...rear mount axels shift linkage. What about the half shaft (sorry for the noob question). The mechanics of it all i get. The wiring is where i come up short. In all my searching there is not post in what needs to be wired for this swap. Some people say that vtec needs to be wiried and other say its already there. as far i can tell the vtec wire is the green and yellow wire wich i have already even though my d series is not vtec why? Any information would be greatly appreciated wiring is where im the most confused. I'm sure its not as hard as im making it out to be.
Thanks in advance
ProjectNoob
Thanks in advance
ProjectNoob
Thread
Thread Starter
Forum
Replies
Last Post
Sinista
Honda Civic / Del Sol (1992 - 2000)
8
01-19-2006 05:00 AM