b16a in 94 LS
12-28-2001, 11:06 PM
#1
New User
Thread Starter
Join Date: Dec 2000
Location: stockbridge, GA, US
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
b16a in 94 LS
I dont want opinions or Y do i want this swap... i just want little bullshit ill run into in this swap.. im doing it 2morrow... all help is greatly appreciated
12-29-2001, 10:35 AM
#2
Re: b16a in 94 LS (Ricemustdie)
You will probably have to run a VTEC wire to the solenoid.
The swap should be straight forward. If you run into any problems with wiring or VTEC engagment, take it up to my brother at Kak's shop and ask.
Len
The swap should be straight forward. If you run into any problems with wiring or VTEC engagment, take it up to my brother at Kak's shop and ask.
Len
12-29-2001, 11:35 AM
#3
New User
Thread Starter
Join Date: Dec 2000
Location: stockbridge, GA, US
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16a in 94 LS (ILR)
i got the harness off a VTEC del sol..... i just need to know how odb1 will work since the eninge was b4 odb1... and if a accord EX ECU will work in any way... for vtec ecu needs
12-29-2001, 01:01 PM
#4
Re: b16a in 94 LS (Ricemustdie)
i got the harness off a VTEC del sol..... i just need to know how odb1 will work since the eninge was b4 odb1... and if a accord EX ECU will work in any way... for vtec ecu needs
odb? Old Dirty Bastard? LoL...it's On Board Diagnostics f00! As for the ECU, I'm not positive an Accord EX ECU will work. Let me do some research.
Thread
Thread Starter
Forum
Replies
Last Post
