NIKE SB'd

iTrader: (1)

Like the title says I just need to know the color of the wires going IACV clip because I recently finished my swap and the only thing I have left to solve is the IAC code and I have 3 different clips that are candidates. I know that the IAC is good because I already replaced it w/ my old one that I know works. Also, if you could give me a diagram of where the wire goes in the strut tower clip (where the engine harness meets the chassis harness ie. a diagram would look something like

(1) (2) (3)
(4) (5) (6) (7)
(8) (9) (10)

or something like that (my diagram would be looking towards the firewall.)

that would be great too! thanks.

NIKE SB'd

iTrader: (1)

nobody has a GSR? I find this hard to believe

Prod

2 wire clip
blue w/black stripe
yellow w/black stripe

looks like 4 blk/blue and 12 yel/blk on the harness

(clip on top 3 is red, 1 is blk/yel)
1.2.3
4.5.6.7
8.9.10.11
12.13.14




Modified by Prod at 8:57 PM 9/16/2004

NIKE SB'd

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Prod &raquo;</TD></TR><TR><TD CLASS="quote">2 wire clip
blue w/black stripe
yellow w/black stripe

looks like 4 blk/blue and 12 yel/blk on the harness

(clip on top 3 is red, 1 is blk/yel)
1.2.3
4.5.6.7
8.9.10.11
12.13.14


Modified by Prod at 8:57 PM 9/16/2004</TD></TR></TABLE>

okay cool looks like I got it right then I just have to figure out why the wires aren't going to the shock tower in that order...

NIKE SB'd

iTrader: (1)

EDIT: I have that exact clip, but it's on the driver's side... is that right or should it be on the passenger side? I think I have it right because I am only throwing one code...


Modified by BLAME_canada at 2:31 AM 9/17/2004