Accord 4x114 on EG/EK/DC chassis?
12-23-2005, 01:11 AM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2005
Location: NORCAL 408 BUILT, CA
Posts: 1,166
Likes: 0
Received 2 Likes
on
2 Posts
Accord 4x114 on EG/EK/DC chassis?
I always wondered every since a friend of mine had 96 ITR wheels on his accord..since accords are easier to come by then ITR 4 lug..I was wondering if i the accord brake assyembly would bolt up.
01-05-2006, 02:04 PM
#4
Honda-Tech Member
Join Date: Jul 2002
Location: Dirty South, USA
Posts: 1,439
Likes: 0
Received 0 Likes
on
0 Posts
Re: Accord 4x114 on EG/EK/DC chassis? (Slaughter)
The accord wagon or V6 calipers are the same as the prelude VTEC and ITR calipers... so swapping the brakes over would be the same as swapping itr stuff..
however if you are asking to bolt the whole 4x114 suspension (or even hubs), it will not work.
however if you are asking to bolt the whole 4x114 suspension (or even hubs), it will not work.
Thread
Thread Starter
Forum
Replies
Last Post
My95SlvrBlt
Road Racing / Autocross & Time Attack
6
09-21-2006 09:33 AM
