oil cooler inlet hose size
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2008
Location: sc, usa
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
oil cooler inlet hose size
I'm currently putting my motor back together and I cant seem to find where I placed my oil cooler inlet hose. I was wondering if someone knew the size of this hose so i could go to the parts store and just get them to cut me a foot of it. Here's what I'm talking about:
http://hondapartsunlimited.com/schon...hidIrno=%7C009
http://hondapartsunlimited.com/schon...hidIrno=%7C009
#3
Honda-Tech Member
Thread Starter
Join Date: Aug 2008
Location: sc, usa
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
#6
Honda-Tech Member
Re: oil cooler inlet hose size
Why not measure the OD of the fitting on the oil cooler? Seems easy enough since you have everything apart.
I recall that the bends in the hose are rather tight, so a preformed hose will work better than a straight hose that is being bent.
I recall that the bends in the hose are rather tight, so a preformed hose will work better than a straight hose that is being bent.
Trending Topics
#8
Honda-Tech Member
Join Date: Dec 2004
Location: Drexel Hill, Pa, 19026
Posts: 2,801
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post