Yeah, get it done by someone who knows how to weld.

 

What are some good muffler or exhaust brand?

 

custom = custom = custom = no brand.

Muffler = pick something with a good price, sound, and look. I went with an OBX oval w/ dual 3" outs. Here's my rear.

 

if u cant afford name brand, jus go straight pipe

 

apexi

 

here is my review of my exhaust the apexi gt spec, I have videos in the review. enjoy

https://honda-tech.com/forums/honda-prelude-4/exhaust-review-apexi-gt-spec-exhaust-system-2369782/

 

I'm not really a big fan of the N1 or gt spec. I like the stock look like the vibrant, magnaflow, and the apexi ws2.

Anybody rolling with the apexi ws2 3inch?

 

Does anyone actually make power with a 3inch exhaust on an N/A setup?

 

i had the n1 and it was way loud
just got a custom put together and it sounds amazing. it still uses a lot of the apexi piping but has a magnaflow resonator and muffler
all 2.5 except for the gay dc header(soon to be fixed)
i can get a sound clip if its necessary

 

yes

 

FAQ's - NA H22 - 3" exhaust comparison

 

Is there a header out there though that's made to be run with a 3" exhaust? I was thinking about eventually redoing the exhaust since i have a cheap one but it sounds great with no problems at all and straight too. I know of a good shop that could prob build me a 3" for a lil over $100 provided I get the muffler and resonator.

 

$100 to get your entire exhaust welded up? Good luck with that. Mine cost $400 for 2.5" piping & labor. I supplied all other components.

 

I'm thinking of buying this to match my hytech replica header with 2.5 piping. It has Titanium tip muffler, also a hi-flow cat, plus I can use 10% off ebay coupon

 

Pretty sure that St. Patrick's Day 10% coupon is expired... Considering it was yesterday...
((Unless you have something else..?)

 

I'd grab it up. But keep in mind that looks like a test pipe, not a high-flow cat.

 

Thermal R&D Stealth Cat-Back Exhaust System - they make 2.5" and the quality is better than the rest. I have had mine for 9 years. Good thick stainless.

 

Yep. With custom 2.5" (crush-bent) and an 18" chambered resonator(brand unknown) it sounds very nice, and fairly quiet. We'll see how it sounds with SS 3" when my turbo build is done.

http://store.kteller.biz/prodtype.as...cordPosition=1

Pipe only, all mandrel bends, 4th and 5th gen kits. I got the 3" SS for my current build. Nice bends.