Clutch Question: Clutch Damper Replacement or Removal
#26
Honda-Tech Member
iTrader: (1)
Join Date: Oct 2004
Location: Tucson...Cactus Town, Az, usa
Posts: 888
Likes: 0
Received 1 Like
on
1 Post
Re: (Hawkze_2.3)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hawkze_2.3 »</TD></TR><TR><TD CLASS="quote">/\/\/\Bump for a SS clutch line/\/\/\</TD></TR></TABLE>
#28
Re: (khalal538)
good find
I wonder if that line they sell is full length from the mc to the slave, or if its just a replacement for the ~12" rubber line like this one:
http://cgi.ebay.com/ebaymotors...=WDVW
I wonder if that line they sell is full length from the mc to the slave, or if its just a replacement for the ~12" rubber line like this one:
http://cgi.ebay.com/ebaymotors...=WDVW
#29
Member
Join Date: Jun 2004
Location: Clemson, SC, United States
Posts: 1,117
Likes: 0
Received 0 Likes
on
0 Posts
Re: (syntax420)
wow, I'm now really interested in this too! I have my motor out and what better time to add more projects than now! Whoever can find the best clutch line from the mc to the slave has my order!!!
#30
Honda-Tech Member
Join Date: Jan 2004
Location: Further down the spiral, TX, usa
Posts: 10,629
Likes: 0
Received 1 Like
on
1 Post
Re: (khalal538)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by khalal538 »</TD></TR><TR><TD CLASS="quote">found a site that has SS clutch lines and makes custom sizes too.
http://www.techna-fit.com/clutch.html
</TD></TR></TABLE>
That is a good find! I bet it's just a replacement for the stock rubber end-piece that's only like a foot long, though. I'll send them an e-mail....
http://www.techna-fit.com/clutch.html
</TD></TR></TABLE>
That is a good find! I bet it's just a replacement for the stock rubber end-piece that's only like a foot long, though. I'll send them an e-mail....
#31
Honda-Tech Member
iTrader: (1)
Join Date: Oct 2004
Location: Tucson...Cactus Town, Az, usa
Posts: 888
Likes: 0
Received 1 Like
on
1 Post
Re: (Hawkze_2.3)
Ya, that is a replacement for the rubber, i just got mine today...
very high quality. they also make custom sizes...so i'm guessing if one of you get the measurements for the whole line (from mc to slave) they can fabricate one within minutes...
very high quality. they also make custom sizes...so i'm guessing if one of you get the measurements for the whole line (from mc to slave) they can fabricate one within minutes...
#32
all the brake line fittings on the car are the same size, unless i am mistaken.....someone just pop theirs off and take it to a brake shop....
if i had a local one willing to do make it i would do it....
if i had a local one willing to do make it i would do it....
#33
Re: (mgags7)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mgags7 »</TD></TR><TR><TD CLASS="quote">all the brake line fittings on the car are the same size, unless i am mistaken.....someone just pop theirs off and take it to a brake shop....
if i had a local one willing to do make it i would do it....</TD></TR></TABLE>
I am curious about the fittings on the clutch slave and clutch m/c. Are you positive that they are the same as the fittings on the brakes? I am guessing that they are 10mmx1.25 can anyone confirm this?
if i had a local one willing to do make it i would do it....</TD></TR></TABLE>
I am curious about the fittings on the clutch slave and clutch m/c. Are you positive that they are the same as the fittings on the brakes? I am guessing that they are 10mmx1.25 can anyone confirm this?
#34
Honda-Tech Member
Join Date: Jan 2004
Location: Further down the spiral, TX, usa
Posts: 10,629
Likes: 0
Received 1 Like
on
1 Post
Re: (khalal538)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by khalal538 »</TD></TR><TR><TD CLASS="quote">found a site that has SS clutch lines and makes custom sizes too.
http://www.techna-fit.com/clutch.html
</TD></TR></TABLE>
/\/\Yeah, I got an e-mail response. It's just a replacement for the rubber section.....
http://www.techna-fit.com/clutch.html
</TD></TR></TABLE>
/\/\Yeah, I got an e-mail response. It's just a replacement for the rubber section.....
#35
the fitting at the clutch master cylinder is a 12mmx1.0 and the one at the slave cylinder is a 10mmx1.0
After measuring with a string line, i had a hydraulic shop fab up a 7ft long flex line with the specified fittings. The fittings are hard to come by, and they did not have ones that swivel so i will have to attach the line to the slave before i affix the slave to the tranny.
The auto to 5sp swap is underway, ill let you guys know how it feels when its done.
After measuring with a string line, i had a hydraulic shop fab up a 7ft long flex line with the specified fittings. The fittings are hard to come by, and they did not have ones that swivel so i will have to attach the line to the slave before i affix the slave to the tranny.
The auto to 5sp swap is underway, ill let you guys know how it feels when its done.
#37
Honda-Tech Member
Re: (MadCityLude)
12mm sounds right, but it's damn near impossible to find a 12mm to -3 brake fitting adapter. i still need to go to the earl's store like i told hawkze i would lol
also, 10mm is the correct size for the slave as i've been told
also, 10mm is the correct size for the slave as i've been told
#38
Honda-Tech Member
Join Date: Jan 2004
Location: Further down the spiral, TX, usa
Posts: 10,629
Likes: 0
Received 1 Like
on
1 Post
Re: (MadCityLude)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MadCityLude »</TD></TR><TR><TD CLASS="quote">Did anyone ever do this? If so were his fitting sizes correct? Did everything function OK?</TD></TR></TABLE>
I think this thread should have all the info on fitting sizes and such--https://honda-tech.com/zerothread?id=1689666
To sum it up, you need a 7ft line (-3 AN is good) with a 10mm brake fitting on one end and a 12mm brake fitting on the other.
I am about to take my parts to a hydraulic shop here pretty soon and I'll have some results after that.
I think this thread should have all the info on fitting sizes and such--https://honda-tech.com/zerothread?id=1689666
To sum it up, you need a 7ft line (-3 AN is good) with a 10mm brake fitting on one end and a 12mm brake fitting on the other.
I am about to take my parts to a hydraulic shop here pretty soon and I'll have some results after that.
#39
Honda-Tech Member
Join Date: Jan 2004
Location: Further down the spiral, TX, usa
Posts: 10,629
Likes: 0
Received 1 Like
on
1 Post
Re: (soundbomber)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by soundbomber »</TD></TR><TR><TD CLASS="quote"> i still need to go to the earl's store like i told hawkze i would lol
</TD></TR></TABLE>
Yeah, take your time bastard JK
</TD></TR></TABLE>
Yeah, take your time bastard JK
#41
Re: (MadCityLude)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MadCityLude »</TD></TR><TR><TD CLASS="quote">If anyone finds the fittings needed for this please et me know. I called around this morning looking for the sizes posted here and it looks like I am gonna have a hard time getting one of them.(12)</TD></TR></TABLE>
just search around online, you can get all kinds of -an fittings
just search around online, you can get all kinds of -an fittings
#43
well im ABSOLUTELY counting on the rest of you to find this crap, and then let me know...lol....
but really.....FIND IT!!
THATS HOW I TALK! ITS MY BEER! SAMUEL JACKSON! IT'LL GET YA DRUNK!
YOU'LL BE F*CKIN FAT BITCHES IN NO TIME!
but really.....FIND IT!!
THATS HOW I TALK! ITS MY BEER! SAMUEL JACKSON! IT'LL GET YA DRUNK!
YOU'LL BE F*CKIN FAT BITCHES IN NO TIME!
#45
Guest
Posts: n/a
Re: (mgags7)
I wanted the 45 for the end near the firewall cause it is a tight fit. There is a post here that shows it. Its in the other thread linked
https://honda-tech.com/zerothread?id=1689666
https://honda-tech.com/zerothread?id=1689666
#49
Re: (mgags7)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mgags7 »</TD></TR><TR><TD CLASS="quote">mmm i want in, if you end up ordering one, lemme in on it</TD></TR></TABLE>
post up a copy of your measurements so we can each individually order one.
post up a copy of your measurements so we can each individually order one.