B-series combos... already searched
#1
Thread Starter
Join Date: Dec 2005
Location: Pittsfield, ME, USA
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
B-series combos... already searched
This weekend, I will be purchasing a '91 prelude Si with a B21A engine. The engine is out and apart, and in need of a gasket set a piston, and rings to put it back together. My question is; What B-series Vtec head(s) (if any) will bolt on to the B21 block? Any additional info about ECU mods and headgaskets required would also be appreciated.
#2
Member
Join Date: Jul 2005
Location: Nobody fcuks with the Jesus...
Posts: 1,196
Likes: 0
Received 0 Likes
on
0 Posts
Re: B-series combos... already searched (voiceinurhead05)
I'm pretty sure that none will "bolt on." you would need to heavily modify your block to accept a Vtec head. You would be better off just doing a motor swap. It would cost less money and take less time.
If I'm wrong, somebody please correct me. But I'm 99.9% sure of this.
If I'm wrong, somebody please correct me. But I'm 99.9% sure of this.
#4
Re: B-series combos... already searched (danny_d19)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by danny_d19 »</TD></TR><TR><TD CLASS="quote">The_Sober is right, no VTEC head will bolt onto the b21 engine</TD></TR></TABLE>
yup, the prelude b series is nothing like the civic/teg b series
yup, the prelude b series is nothing like the civic/teg b series
Thread
Thread Starter
Forum
Replies
Last Post