What did you do to your EF today?
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2004
Location: Langhorne, pa
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
What did you do to your EF today?
Update:
-Installed Foglights (Did some research on H-T, and decided to go with autozone "blazer foglights"
-Painted headlights yellow (some people like it some hate it. Personally I didn't notice that much of a reduction of light output. I works well in bad weather, reduces glare to oncoming traffic. One can of paint thinner and it will come right off if I change my mind.
-Installed a neon half rad, 12" pro form slim fan.
-Then put stock radiator back in until I can get the rad cap from JC whiney.
-Installed MSD Pro Cap, and Blaster 2 coil it is mounted near the fuel filter, but I want to relocate to a better hidden area to keep the wire tuck looking clean.
-My friend finished welding the seat brackets so i could install my Recaros (i need to use washers or something to get them level.
-Relocated most of the engine harness connections to inside the car behind the console.
-Finished the keyless door handle mod, and installed power door locks.
-Painted my BMW Bottlecaps Gloss black
-Went back to full exhaust and ditched the side exit. I miss shooting flames
-Test fitted my 4 point cam-lock harnesses, need to weld in a harness bar before I hook them up.
Modified by CRXB16T at 5:08 PM 1/9/2006
-Installed Foglights (Did some research on H-T, and decided to go with autozone "blazer foglights"
-Painted headlights yellow (some people like it some hate it. Personally I didn't notice that much of a reduction of light output. I works well in bad weather, reduces glare to oncoming traffic. One can of paint thinner and it will come right off if I change my mind.
-Installed a neon half rad, 12" pro form slim fan.
-Then put stock radiator back in until I can get the rad cap from JC whiney.
-Installed MSD Pro Cap, and Blaster 2 coil it is mounted near the fuel filter, but I want to relocate to a better hidden area to keep the wire tuck looking clean.
-My friend finished welding the seat brackets so i could install my Recaros (i need to use washers or something to get them level.
-Relocated most of the engine harness connections to inside the car behind the console.
-Finished the keyless door handle mod, and installed power door locks.
-Painted my BMW Bottlecaps Gloss black
-Went back to full exhaust and ditched the side exit. I miss shooting flames
-Test fitted my 4 point cam-lock harnesses, need to weld in a harness bar before I hook them up.
Modified by CRXB16T at 5:08 PM 1/9/2006
#2
Member
Join Date: Aug 2002
Location: Wilmington, De, USA
Posts: 3,864
Likes: 0
Received 0 Likes
on
0 Posts
Re: What did you do to your EF today? (CRXB16T)
Messed with my timing, fixed some anti-theft wiring , and spent endless hours online researching my future projects for my rex.
Trending Topics
#8
Senior Member
Join Date: Dec 2004
Location: EMAIL ME at Chase@ChaseBaysOnline.com
Posts: 10,137
Likes: 0
Received 0 Likes
on
0 Posts
Re: (EF8opey)
put my freshly steamclean'ed and restored carpet back in. Put my ST 22mm swaybar endlinks back on. Ordered some oh so badass stuff for my car
#9
Honda-Tech Member
Fully detailed my car. Put in a short shifter. Rotated And balanced my tires. uhh.. put my liscense plate back on... and attempted to put on my fog lights but got tired
#14
Honda-Tech Member
Re: (FOMULA91)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FOMULA91 »</TD></TR><TR><TD CLASS="quote">Installed a new window wiper.</TD></TR></TABLE>
I need some new wiper blades too. Haha
I need some new wiper blades too. Haha
#16
Re: (SlobberGoat)
first of all, great thread.
opened my door panel to fix my lock
new center console installed
new cig tray and liter for my phone
put some radials on
chirped 4 gears and pissed on a ricer.
opened my door panel to fix my lock
new center console installed
new cig tray and liter for my phone
put some radials on
chirped 4 gears and pissed on a ricer.
#17
Honda-Tech Member
Re: (jdmazm)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmazm »</TD></TR><TR><TD CLASS="quote">first of all, great thread.
chirped 4 gears and pissed on a ricer.</TD></TR></TABLE>
Haha, Cheers
chirped 4 gears and pissed on a ricer.</TD></TR></TABLE>
Haha, Cheers
#20
Re: (eda6)
put a new headunit in my car, sound out of both speakers finally!
then my check engine light came on and the car wouldn't rev past 3k (no ecu codes tho)
then after i shut it off it wont crank at all, even w/ a jump
now im sitting on my *** trying to figure out what just happened
then my check engine light came on and the car wouldn't rev past 3k (no ecu codes tho)
then after i shut it off it wont crank at all, even w/ a jump
now im sitting on my *** trying to figure out what just happened
#22
Honda-Tech Member
Re: (Riceboy891)
installed B16A head with GSR cams on a B18A block and got it to run, still have to fix the leaky hose, wire vtec and change the ECU...not my car though...just working on it for a customer!!!