Vtec not working??
04-12-2006, 11:10 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2004
Location: Jackson, KY, USA
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Vtec not working??
Hey! Newbie here with first vtec motor.
Just got my d16vtec motor swapped in my my 90hatch. Motor runs excellent but, I am not sure the vtec in working. I have never felt the engine surge or change sound like I understand it is supposed to.
Is there any chance that a non working speedo is causing the vtec not to kick in?..as per the Haynes manual, the vtec turning on is based on vehicle speed, rpm, oil pressure, and so on. I did verify that there is voltage going to the vtec selenoid. Are there some other things that I can look for and check?
Just got my d16vtec motor swapped in my my 90hatch. Motor runs excellent but, I am not sure the vtec in working. I have never felt the engine surge or change sound like I understand it is supposed to.
Is there any chance that a non working speedo is causing the vtec not to kick in?..as per the Haynes manual, the vtec turning on is based on vehicle speed, rpm, oil pressure, and so on. I did verify that there is voltage going to the vtec selenoid. Are there some other things that I can look for and check?
04-12-2006, 11:16 AM
#3
Join Date: Feb 2005
Location: Arlington, Wa, United States
Posts: 228
Likes: 0
Received 1 Like
on
1 Post
Re: Vtec not working?? (rev_it)
your vss not working could be the problem, or most likely is the problem. what is your motor redlining at at the moment? it should pull to 7200 rpm.
Thread
Thread Starter
Forum
Replies
Last Post
ATF Kuk
Acura Integra Type-R
26
05-01-2003 12:20 PM