pb16b

done.

Clipsed

iTrader: (2)

b16_madman

It's time. I emailed you's guys. Kit + high press line. Dang. Today's an expensive day. Just ordered a pair of seat brackets & rails for the Recaro setup. Feelin a lil poor now.

bks84

iTrader: (9)

Are these going to be available for DA applications?

I CRX I

would these come with any type of waranty?

pb16b

DA test fitment in progress. i'll know for sure by this weekend.

unlikely, but if failure occurs, we'll deal with it case by case. we stand by our customer service, we're not happy unless you're happy.

bks84

iTrader: (9)

Good to know. Thanks.

pb16b

i just re-read this and it looks like i said UNLIKELY.

i meant, in the case of unlikely failure, we'll deal with it case by case.

Clipsed

iTrader: (2)

That's why I was scratching my head earlier, I knew SOMETHING didn't sound right with that post... Good catch.

b16_madman

Look forward to receiving the bracket! It may take me a month or so before I actually do the install as I'm quite busy w/work etc.

dlaub25

iTrader: (1)

I ordered my bracket today. As long as everything else gets here on time I'm planning on doing the install this weekend. I'll try and snap a couple shots while the dash is off.

zurud

How long have you test this setup? I think the design is not strong enough. I think for daily driver this will break in less than a year. I really want hydraulic setup because I broke 4 bracket and 4 cable in 2 yrs. All from honda. I am planning to use wilwood floor pedal set up. But I don't know if there any space for the etu.

pb16b

not too long. mine has been in for almost a year but i'm not daily driven. but mine was prototype and a lot thinner material was used and it's holding up fine. i was thinking of trying the wilwood but there's not enough room on my crx. this bracket will not break. the stock pedals might still break. this bracket will help reinforce the stock pedals and reduce some of the flexing issues with the stock pedal assembly to make them hopefully last longer than they have. the only way to fix the stock pedal assembly is to redesign it.

b16_madman

What all should I be looking for in the image above to complete my parts list?

Illust #'s: 006,008,009016,017,018,028,031 (x2)

Mind you I'll get a lot of little things from the junkyard, but this is just a reference guide.

pb16b

you'll also want 3 and 13

TheSauceSpot

Put some part numbers together to make it easier.. with pricing.. figure more info would get more people interested. all prices are from myhondapartsstore.com Anything else that you can add to this list to make it a complete install would help out... minus welding or labor charges.









BRACKET KIT---------------------------------------------------150.00
46164-632-000 FLOAT ------------------------------------------3.51
46920-SR3-A01 MASTER CYLINDER ASSY., CLUTCH ------------ 93.08
46928-SF1-000 SEAL, CLUTCH MASTER CYLINDER -------------- 3.51
46930-SR3-013 CYLINDER ASSY., SLAVE -----------------------54.56
46966-SR3-A00 HOLDER, TANK ----------------------------------8.40
46972-SD4-003 TANK, CLUTCH FLUID ----------------------------8.56
46973-SD4-003 CAP, RESERVE TANK ---------------------------- 13.83
46975-SD4-003 SEAL, RESERVE TANK ---------------------------- 2.98
94070-08080 NUT-WASHER (8MM)-------------------------------- .24 (x2)
95701-08025-08 BOLT, FLANGE (8X25) --------------------------- .68 (x2)
Line to connect everything ---------------------------------------$depends on what you want to use
Fluid--------------------------------------------------------------$$

TOTAL(just parts)-----------------------------------------------$340.27

b16_madman

Yah guys this really does help. I appreciate it a lot. I won't go OEM on it all, but it's good for non hydro-clutch types to dive into this mod.

kim_2_da_chee

Payment sent via PayPal.

I'll do a write up once I get back from afghanistan.

pb16b

werd. thanks for your service to our country.

bks84

iTrader: (9)

His location says Canada...

pb16b

lol, didn't see that. well, thanks for serving your country

Clipsed

iTrader: (2)

lmfao!!!

Boosted Chemist

iTrader: (1)

subscribed

kim_2_da_chee

LOL!

we all work together over here, it's all good.

texasnick

I like this. I will be sending you my hard earned money soon.