Re-build thread -- cr-x ed9 b20
03-12-2013, 03:48 AM
#52
Honda-Tech Member
Thread Starter
Join Date: Oct 2009
Location: Russian Federation, Moscow
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re-build thread -- cr-x ed9 b20
damned trucking company wants 250$ for the shipping of my luggage rack, for which i've already paied 80$ (its photo on the previos page). i think that it would be better to forget about it and to leave my old one without windshield, washer nozzle, spoiler and brake light, so as 330$ is a price too high even for such thing..
06-03-2013, 04:36 AM
#55
Honda-Tech Member
Thread Starter
Join Date: Oct 2009
Location: Russian Federation, Moscow
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re-build thread -- cr-x ed9 b20
this weekend finished with repairing steering rack: rods, rack's ends, dust-coats. While I've taking off rack, noticed broken bolt in the subframe. Much time spent for searching of subframe. so as it was impossible to drill out broken bolt. Found small spot of rust above shift linkage. delete it. Glue in rear windows. Connected VSS to the siR cluster and began connect doors and trunk lid switches.. but smth went wrong. Speedo doesn't work (try it on hanging out frond wheels) and wires from doors switches somewhere mix up with wire of the trunk..
Also i've paid today for mugen twin loop exhaust from EK4. i hope it match my rex with a minimum redesigning. (photo below, it's not mine, but i bought the same). Have anybody ever put on exhaust from ek to crx?
Also i've paid today for mugen twin loop exhaust from EK4. i hope it match my rex with a minimum redesigning. (photo below, it's not mine, but i bought the same). Have anybody ever put on exhaust from ek to crx?
06-04-2013, 10:33 PM
#56
Honda-Tech Member
Thread Starter
Join Date: Oct 2009
Location: Russian Federation, Moscow
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re-build thread -- cr-x ed9 b20
finished with a cluster.
great thanks for this site: https://sites.google.com/site/trever.../jdmef9cluster
But so as wires between USDM and EDM are different it was rather difficult to find places, where wires from cluster connect with door's switches wires.
great thanks for this site: https://sites.google.com/site/trever.../jdmef9cluster
But so as wires between USDM and EDM are different it was rather difficult to find places, where wires from cluster connect with door's switches wires.
12-21-2013, 12:22 PM
#62
Honda-Tech Member
Thread Starter
Join Date: Oct 2009
Location: Russian Federation, Moscow
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re-build thread -- cr-x ed9 b20
Bought a few presents for my bucket.. previous exhaust (mugen) sold, the new one is 5ziggen. ecu p30 with analog of hondata.
03-19-2014, 07:30 AM
#64
Honda-Tech Member
Thread Starter
Join Date: Oct 2009
Location: Russian Federation, Moscow
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re-build thread -- cr-x ed9 b20
update.
new HR arms
P72 vtec head
skunk2 gear cam shaft
ebay vtec line
supertech guides
teflon gasket
ARP pins
new HR arms
P72 vtec head
skunk2 gear cam shaft
ebay vtec line
supertech guides
teflon gasket
ARP pins
05-13-2014, 10:13 AM
#68
Honda-Tech Member
Thread Starter
Join Date: Oct 2009
Location: Russian Federation, Moscow
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
09-11-2014, 09:40 AM
#70
Honda-Tech Member
Thread Starter
Join Date: Oct 2009
Location: Russian Federation, Moscow
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re-build thread -- cr-x ed9 b20
upd. some fresh photo of reconstruction..
need help! how to convert 4 lugs hub to 5 lugs hub without milling?
if i use 14 Knukles from DA and 5 lugs hub from H-RV, what ball bearing do i need?
i saw FAQ, but there too old information..
need help! how to convert 4 lugs hub to 5 lugs hub without milling?
if i use 14 Knukles from DA and 5 lugs hub from H-RV, what ball bearing do i need?
i saw FAQ, but there too old information..
09-11-2014, 01:05 PM
#71
Honda-Tech Member
iTrader: (1)
Join Date: May 2011
Location: West Orange NJ
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re-build thread -- cr-x ed9 b20
I hear the easiest way is to just get a whole spindle from a dc5. From what I heard It's almost plug and play. Key word ALMOST.
10-07-2015, 11:48 PM
#73
Honda-Tech Member
Thread Starter
Join Date: Oct 2009
Location: Russian Federation, Moscow
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re-build thread -- cr-x ed9 b20
so as tank of brake master cylinder was installed closely to the bar, i decide to change cylinder to one from honda odyssey RA6
