quick question....
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2009
Location: dartmouth,nova scotia
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
quick question....
i am looking at getting a jdm front end but it only comes with hood bumper corner lights head lights and bumper lights. so my question is are the fenders the same here in canada as they are in japan minus the side marker lights thanks
#2
Honda-Tech Member
Thread Starter
Join Date: Apr 2009
Location: dartmouth,nova scotia
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Re: quick question....
you mean to tell me out of 23 people knowbody knows come on ladies some has to know it is afecting my desicion right now
#4
Honda-Tech Member
Thread Starter
Join Date: Apr 2009
Location: dartmouth,nova scotia
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Re: quick question....
are you positive because the guy that is selling it says that the fenders are the same and so is the rad suport?
#5
Honda-Tech Member
Re: quick question....
the T bar on the jdm front end is different. the hood latch is over more by a few inches. even seen an article on the swap in honda tuning before.
#6
Honda-Tech Member
Re: quick question....
upon further searching the jdm fenders are the same other than the side marker lights. corners will fit. the usdm hood latch however will not work right without the jdm t bar. you could drill the holes out and shim it with a washer perhaps..but its ghetto
Thread
Thread Starter
Forum
Replies
Last Post
Dumped Ek
Canada (Sales)
1
01-04-2013 04:47 AM
Jonnyr4c
Honda CRX / EF Civic (1988 - 1991)
31
11-20-2005 04:28 PM